List of products by brand VICTRON ENERGY

RJ12 UTP Cable 0.3 m is a cable that connects the shunt of a BMV battery monitor to its display unit. It replaces the standard 10 m cable supplied with the BMV when that cable is too long.

Temperature sensor type C is a battery temperature sensor supplied as a spare part for the Inverter RS Smart Solar. It is used to measure the battery temperature in systems built around this inverter.

CAN-bus Temperature sensor is a battery temperature sensor for the Buck-Boost DC-DC converter range and an essential accessory with LFP lithium batteries. It reports the battery temperature so the converter can reduce or stop charging in the cold.

Argofet 100-3 is a FET battery isolator that allows three batteries to be charged simultaneously from one alternator or a single-output battery charger, without connecting the batteries together. Unlike Argodiode isolators, it has virtually no voltage loss, so the alternator output voltage does not need to be increased. The maximum charge current is 100 A.

Argofet 200-2 is a FET battery isolator that allows two batteries to be charged simultaneously from one alternator or a single-output battery charger, without connecting the batteries together. Unlike Argodiode isolators, it has virtually no voltage loss, so the alternator output voltage does not need to be increased. The maximum charge current is 200 A.

Argofet 200-3 is a FET battery isolator that allows three batteries to be charged simultaneously from one alternator or a single-output battery charger, without connecting the batteries together. Unlike Argodiode isolators, it has virtually no voltage loss, so the alternator output voltage does not need to be increased. The maximum charge current is 200 A.

Argofet 200-3 is a FET battery isolator that allows three batteries to be charged simultaneously from one alternator or a single-output battery charger, without connecting the batteries together. Unlike Argodiode isolators, it has virtually no voltage loss, so the alternator output voltage does not need to be increased. The maximum charge current is 200 A.

Argofet 200-2 is a FET battery isolator that allows two batteries to be charged simultaneously from one alternator or a single-output battery charger, without connecting the batteries together. Unlike Argodiode isolators, it has virtually no voltage loss, so the alternator output voltage does not need to be increased. The maximum charge current is 200 A.

Argodiode 180-3AC is a battery isolator with Schottky diodes that allows three batteries to be charged simultaneously from one alternator, without connecting the batteries together. Discharging the accessory battery does not discharge the starter battery, and the voltage drop remains low. It handles up to 180 A in 12 V or 24 V systems.

Argodiode 160-2AC is a battery isolator with Schottky diodes that allows two batteries to be charged simultaneously from one alternator, without connecting the batteries together. Discharging the accessory battery does not discharge the starter battery, and the voltage drop remains low. It handles up to 160 A in 12 V or 24 V systems.

Argodiode 140-3AC is a battery isolator with Schottky diodes that allows three batteries to be charged simultaneously from one alternator, without connecting the batteries together. Discharging the accessory battery does not discharge the starter battery, and the voltage drop remains low. It handles up to 140 A in 12 V or 24 V systems.

Argodiode 120-2AC is a battery isolator with Schottky diodes that allows two batteries to be charged simultaneously from one alternator, without connecting the batteries together. Discharging the accessory battery does not discharge the starter battery, and the voltage drop remains low. It handles up to 120 A in 12 V or 24 V systems.

Argofet 100-3 is a FET battery isolator that allows three batteries to be charged simultaneously from one alternator or a single-output battery charger, without connecting the batteries together. Unlike Argodiode isolators, it has virtually no voltage loss, so the alternator output voltage does not need to be increased. The maximum charge current is 100 A.

Argodiode 80-2SC is a battery isolator with Schottky diodes that allows two batteries to be charged simultaneously from one alternator, without connecting the batteries together. Discharging the accessory battery does not discharge the starter battery, and the voltage drop remains low. It handles up to 80 A in 12 V or 24 V systems.

Argodiode 100-3AC is a battery isolator with Schottky diodes that allows three batteries to be charged simultaneously from one alternator, without connecting the batteries together. Discharging the accessory battery does not discharge the starter battery, and the voltage drop remains low. It handles up to 100 A in 12 V or 24 V systems.

Argofet 100-2 is a FET battery isolator that allows two batteries to be charged simultaneously from one alternator or a single-output battery charger, without connecting the batteries together. Unlike Argodiode isolators, it has virtually no voltage loss, so the alternator output voltage does not need to be increased. The maximum charge current is 100 A.

Argofet 100-2 is a FET battery isolator that allows two batteries to be charged simultaneously from one alternator or a single-output battery charger, without connecting the batteries together. Unlike Argodiode isolators, it has virtually no voltage loss, so the alternator output voltage does not need to be increased. The maximum charge current is 100 A.

Argodiode 80-2SC is a battery isolator with Schottky diodes that allows two batteries to be charged simultaneously from one alternator, without connecting the batteries together. Discharging the accessory battery does not discharge the starter battery, and the voltage drop remains low. It handles up to 80 A in 12 V or 24 V systems.

Argodiode 80-2AC is a battery isolator with Schottky diodes that allows two batteries to be charged simultaneously from one alternator, without connecting the batteries together. Discharging the accessory battery does not discharge the starter battery, and the voltage drop remains low. It handles up to 80 A in 12 V or 24 V systems.

DIN35 adapter large is a mounting accessory supplied as a set of 2 pieces, used to fit a device easily on a DIN rail. It is suitable for the Cerbo GX.