Cookie consent

We use cookies that the shop needs to work and, only with your consent, statistics and marketing cookies.

Learn more
  • -15%
MPPT controller Victron BlueSolar MPPT 150/100-Tr VE.Can, 100 A

MPPT solar charge controller Victron BlueSolar MPPT 150/100-Tr VE.Can, 100 A

€637 Save €96
€541 Tax included

€451 Tax excluded

BlueSolar MPPT 150/100-Tr VE.Can is an MPPT solar charge controller for 12/24/48 V batteries, with a charge current of 100 A, a maximum PV open-circuit voltage of 150 V and a maximum efficiency of 98 %. Communication is via VE.Direct, VE.Can, and the protection rating is IP22 (connection area), IP43 (electronics).

Reference SCC115110420

Victron Energy commercial warranty: 5 years for defects in materials and workmanship, handled through us as the seller. In addition to the legal guarantee. Conditions

Your legal guarantee rights

Legal guarantee

EU harmonised notice on the legal guarantee of conformity

More information: europa.eu/youreurope/guarantees
Open the notice at full size

BlueSolar MPPT 150/100-Tr VE.Can - MPPT solar charge controller for 12/24/48 V batteries

BlueSolar MPPT 150/100-Tr VE.Can is a solar charge controller with maximum power point tracking (MPPT), for 12/24/48 V batteries, with a charge current of 100 A and a maximum PV open-circuit voltage of 150 V. The VE.Direct port and the VE.Can port allow connection to a monitoring device.

Main features:

  • Battery voltage: 12/24/48 V, automatic selection
  • Charge current: 100 A
  • Maximum PV voltage (Voc): 150 V
  • Maximum PV power: 1450 W (12 V), 2900 W (24 V), 5800 W (48 V)
  • Maximum efficiency: 98 %
  • Communication: VE.Direct, VE.Can
  • Protection rating: IP22 connection area, IP43 electronics

MPPT technology continuously monitors the voltage and current of the solar panels (PV) and tracks the maximum power point, and the advantage is most visible when the sky is partly cloudy and the light intensity keeps changing. The controller can also recharge a deeply discharged battery that is not permanently sulphated or otherwise damaged, and can operate from a battery voltage of 0 V.

The controller has no built-in Bluetooth; with a VE.Direct to Bluetooth Smart dongle, the information (for example battery status and solar panel power) can be viewed wirelessly on iOS and Android devices through the VictronConnect app. If the installation is connected to the internet through a GX device, the Victron Remote Management (VRM) portal gives access to the controller data; for locations without an internet connection, GlobalLink 520 can be used.

Extensive electronic protection: over-temperature protection with power reduction at high temperature, protection against PV short circuit and PV reverse polarity, and PV reverse current protection.

Technical specifications

Battery voltage (automatic selection)12V / 24V / 48V automatic selection (selecting 36V requires a software tool)
Rated charge current100 A
Rated PV power (12 V)1450 W
Rated PV power (24 V)2900 W
Rated PV power (36 V)4350 W
Rated PV power (48 V)5800 W
Absorption charge voltage14.4V / 28.8V / 57.6V (adjustable)
Float charge voltage13.8V / 27.6V / 55.2V (adjustable)
Charge algorithmAdaptive multi-stage (adjustable)
Temperature sensorInternal
Temperature compensation (12 V)-16 mV/°C
Temperature compensation (24 V)-32 mV/°C
Temperature compensation (48 V)-64 mV/°C
Maximum efficiency98 %
Self-consumptionLess than 35mA @ 12V / 20mA @ 48V
Maximum PV open-circuit voltage150 V
PV start-up voltagePV voltage must exceed Vbat + 5V for the controller to start. Afterwards, the minimum PV voltage is Vbat + 1V
Number of MPPT trackers1
Maximum PV short-circuit current70 A
Low-voltage load disconnect11.1V / 22.2V or 11.8V / 23.6V or BatteryLife algorithm
Low-voltage load reconnect13.1V / 26.2V / 52.4V or 14V / 28V / 56V or BatteryLife algorithm
ProtectionsPV reverse polarity, Output short circuit, Over-temperature
Operating temperature range-30 … 60 °C
Maximum humidity95 %
Maximum altitude5000
Environmental conditionsIndoor, not climate-controlled
Pollution degreePD3
Data communicationVE.Direct, VE.Can
Remote on/off terminalYes
Programmable relayDPST, AC ratings: 240VAC / 4A, DC ratings: 4A to 35VDC, 1A to 60VDC
Maximum number of units in synchronised parallel operation25
Battery connection terminalsScrew terminals 35 mm² (2 AWG)
PV connection terminalsScrew terminals 35 mm² (2 AWG)
Remote on/off terminal connectionTwo-pole screw terminal
Relay terminal connectionThree-pole screw terminal
ColourBlue (RAL 5012)
Protection ratingIP22 (connection area), IP43 (electronics)
Weight4.5 kg
Height216 mm
Width295 mm
Depth103 mm
SafetyCSA C22.2, EN-IEC 62109-1, UL 1741
Data retention period46 d

Data sheet

Reference
SCC115110420
Brand
Victron Energy
Product type
MPPT controller
Maximum efficiency
98 %
Battery voltage
12 V
24 V
48 V
Charge current class
71+ A
Max. charge current
100 A
Absorption charge voltage
14.4/28.8/57.6 V
Float charge voltage
13.8/27.6/55.2 V
Charge algorithm
Multi-stage adaptive (adjustable)
Max. PV voltage (Voc)
150 V
Max. PV short-circuit current
70 A
Max. PV power (by battery voltage)
1450 W (12 V), 2900 W (24 V), 4350 W (36 V), 5800 W (48 V)
Bluetooth (app)
No
Communication interfaces
VE.Can
VE.Direct
Programmable relay
Yes
Protections
Output short-circuit, overtemperature, PV reverse polarity
Dimensions (H x W x D)
216 x 295 x 103 mm
Weight
4.5 kg
Ingress protection (IP)
IP22 (connection area), IP43 (electronics)
Operating temperature
-30 ... 60 °C
Max. relative humidity
95 %
Colour
Blue
Standards and compliance
CSA C22.2, EN-IEC 62109-1, UL 1741

We took these technical data from the manufacturer’s datasheet; transcription errors are possible. For 100% accuracy, please consult the attached datasheet.

Compatibility

Other compatible products

Compatibility is calculated automatically from the manufacturers’ technical data and is for information only. For complex systems, we recommend having the configuration checked by a consultant before ordering. Details in the Terms and conditions

Other products in the same category