- -15%
€37 Tax excluded
Victron BlueSolar PWM-LCD&USB 48V-30A is a PWM solar charge controller for 48 V batteries with a rated charge current of 30 A, a maximum solar voltage of 100 V, an LCD display and two 5 V USB outputs. It is suitable for caravans, boats and off-grid cabins.
Victron Energy commercial warranty: 5 years for defects in materials and workmanship, handled through us as the seller. In addition to the legal guarantee. Conditions
Victron BlueSolar PWM-LCD&USB 48V-30A is a PWM-type solar charge controller for 48 V batteries with a rated charge current of 30 A, an LCD display and two USB outputs. It is intended for small photovoltaic applications such as caravans, boats or off-grid cabins.
The LCD display allows easy monitoring and configuration of the operating parameters. The charging algorithm is programmable, with preconfigured algorithms for AGM, GEL, flooded lead-acid and LiFePO4 batteries (only those with an integrated BMS), and the three charging stages (bulk, absorption, float) are programmable. The controller has a programmable night lighting function.
The low-voltage load output has programmable manual switch-off and low-voltage disconnect. The protections include short circuit, overcurrent on the load output and reverse polarity if the panels or the battery are connected incorrectly.
| Battery voltage | 48V |
|---|---|
| Rated charge current | 30 A |
| Automatic load disconnect | Yes |
| Maximum solar voltage | 100V |
| PV array for 12 V | 36-cell solar panel |
| PV array for 24 V | 72-cell solar panel, two 36-cell solar panels in series |
| PV array for 48 V | Two 72-cell solar panels in series, four 36-cell solar panels in series |
| Self-consumption | 10 mA |
| Load output | Manual control + low-voltage disconnect + timer |
| Protections | Reverse battery polarity (fuse), output short circuit, excessive temperature |
| Overload protection at 130 % | Shutdown after 60 seconds |
| Overload protection at 160 % | Shutdown after 5 seconds |
| Short-circuit protection | Immediate shutdown |
| Temperature sensor | No |
| Temperature compensation | No |
| Remote control panel | No |
| Grounding | Common positive |
| Operating temperature range | -35 … 60 °C |
| Maximum humidity | 95 % |
| Absorption charge voltage | 57.6V |
| Float charge voltage | 54.8V |
| Load disconnect at low voltage | 44.8V |
| Load reconnect after low voltage | 50.4V |
| Number of USB ports | 2 |
| USB voltage | 5 V |
| USB current | 2 A |
| Battery terminals | Screw terminals 16 mm² (6 AWG) |
| PV terminals | Screw terminals 16 mm² (6 AWG) |
| Load terminals | Screw terminals 16 mm² (6 AWG) |
| Colour | Blue (RAL 5012) |
| Degree of protection | IP20 |
| Weight | 0.3 kg |
| Height | 101 mm |
| Width | 184 mm |
| Depth | 47 mm |
| Safety | EN-IEC 60335-1, EN-IEC 62109-1 |
| Emissions | EN-IEC 61000-6-1, EN-IEC 61000-6-3, ISO 7637-2 |
We took these technical data from the manufacturer’s datasheet; transcription errors are possible. For 100% accuracy, please consult the attached datasheet.
Compatibility is calculated automatically from the manufacturers’ technical data and is for information only. For complex systems, we recommend having the configuration checked by a consultant before ordering. Details in the Terms and conditions