Cookie consent

We use cookies that the shop needs to work and, only with your consent, statistics and marketing cookies.

MPPT solar charge controller Victron Energy BlueSolar 250/100-Tr VE.Can, 100 A

€781 Save €118
€663 Tax included

€553 Tax excluded

BlueSolar MPPT 250/100-Tr VE.Can is an MPPT solar charge controller for 12, 24 or 48 V batteries, with automatic selection, a charge current of 100 A, a maximum PV open-circuit voltage of 250 V and a maximum efficiency of 99 %. The rated PV power is 1450 W at 12 V, 2900 W at 24 V and 5800 W at 48 V, and communication is via VE.Direct and VE.Can.

Reference SCC125110441

Victron Energy commercial warranty: 5 years for defects in materials and workmanship, handled through us as the seller. In addition to the legal guarantee. Conditions

BlueSolar MPPT 250/100-Tr VE.Can - MPPT solar charge controller 12/24/48 V, 100 A

BlueSolar MPPT 250/100-Tr VE.Can is a solar charge controller with maximum power point tracking (MPPT) for 12, 24 or 48 V batteries with automatic selection, with a charge current of 100 A and a maximum PV open-circuit voltage of 250 V. It has a VE.Direct port and VE.Can ports.

Key features:

  • Battery voltage: 12, 24 or 48 V, automatic selection
  • Charge current: 100 A
  • Maximum PV voltage: 250 V open-circuit
  • Rated PV power: 1450 W (12 V), 2900 W (24 V), 5800 W (48 V)
  • Maximum efficiency: 99 %
  • Communication: VE.Direct, VE.Can
  • Protection rating: IP43 electronics, IP22 connections

MPPT technology tracks the maximum power point extremely fast by constantly monitoring the voltage and current of the solar panels. Its advantage is most noticeable when the sky is partly cloudy and the light intensity changes constantly.

The charge algorithm is fully programmable and includes eight preprogrammed algorithms, selectable with a rotary switch. The internal temperature sensor compensates the absorption and float voltage according to temperature. Protections include over-temperature, with power reduction when the temperature is high, short circuit, PV reverse polarity and PV reverse current.

With a VE.Direct to Bluetooth Smart dongle attached, the controller can be configured and monitored remotely through VictronConnect on iOS and Android devices, including battery status and solar panel power.

The PV connection is made with 35 mm² screw terminals, and the battery connection with 35 mm² screw terminals. The maximum PV short-circuit current is 70 A. The dimensions are 216 x 295 x 103 mm (height x width x depth) and the weight is 4.5 kg. Up to 25 units can operate in synchronised parallel.

Technical specifications

Battery voltage (automatic selection)12V / 24V / 48V automatic selection (a software tool is required to select 36V)
Rated charge current100 A
Rated PV power (12 V)1450 W
Rated PV power (24 V)2900 W
Rated PV power (36 V)4350 W
Rated PV power (48 V)5800 W
Absorption charge voltage14.4V / 28.8V / 57.6V (adjustable)
Float charge voltage13.8V / 27.6V / 55.2V (adjustable)
Charge algorithmAdaptive, multi-stage (adjustable)
Temperature sensorInternal
Temperature compensation (12 V)-16 mV/°C
Temperature compensation (24 V)-32 mV/°C
Temperature compensation (48 V)-64 mV/°C
Maximum efficiency99 %
Self-consumptionLess than 35mA @ 12V / 20mA @ 48V
Maximum PV open-circuit voltage250 V
PV start-up voltageThe PV voltage must exceed Vbat + 5V for the controller to start. After that, the minimum PV voltage is Vbat + 1V
Number of MPPT trackers1
Maximum PV short-circuit current70 A
Low-voltage load disconnect11.1V / 22.2V or 11.8V / 23.6V or BatteryLife algorithm
Load reconnect after low voltage13.1V / 26.2V / 52.4V or 14V / 28V / 56V or BatteryLife algorithm
ProtectionsOutput short circuit, over-temperature, PV reverse polarity
Operating temperature range-30 … 60 °C
Maximum humidity95 %
Maximum altitude5000
Environmental conditionsIndoor, unconditioned
Pollution degreePD3
Data communicationVE.Direct, VE.Can
Remote on/off terminalYes
Programmable relayDPST, AC ratings: 240VAC / 4A, DC ratings: 4A up to 35VDC, 1A up to 60VDC
Maximum number of units in synchronised parallel operation25
Battery terminalsScrew terminals 35 mm² (2 AWG)
PV terminalsScrew terminals 35 mm² (2 AWG)
Remote on/off terminal connectionTwo-pole screw terminal
Relay terminal connectionThree-pole screw terminal
ColourBlue (RAL 5012)
Protection ratingIP22 (connection area), IP43 (electronic components)
Weight4.5 kg
Height216 mm
Width295 mm
Depth103 mm
SafetyCSA C22.2, EN-IEC 62109-1, UL 1741
Data retention period46 d

Data sheet

Reference
SCC125110441
Brand
Victron Energy
Product type
MPPT controller
Maximum efficiency
99 %
Battery voltage
12 V
24 V
48 V
Charge current class
71+ A
Max. charge current
100 A
Absorption charge voltage
14.4/28.8/57.6 V
Float charge voltage
13.8/27.6/55.2 V
Charge algorithm
Multi-stage adaptive (adjustable)
Max. PV voltage (Voc)
250 V
Max. PV short-circuit current
70 A
Max. PV power (by battery voltage)
1450 W (12 V), 2900 W (24 V), 4350 W (36 V), 5800 W (48 V)
Bluetooth (app)
No
Communication interfaces
VE.Can
VE.Direct
Programmable relay
Yes
Protections
Output short-circuit, overtemperature, PV reverse polarity
Dimensions (H x W x D)
216 x 295 x 103 mm
Weight
4.5 kg
Ingress protection (IP)
IP22 (connection area), IP43 (electronics)
Operating temperature
-30 ... 60 °C
Max. relative humidity
95 %
Colour
Blue
Standards and compliance
CSA C22.2, EN-IEC 62109-1, UL 1741

We took these technical data from the manufacturer’s datasheet; transcription errors are possible. For 100% accuracy, please consult the attached datasheet.

Compatibility

Other compatible products

Compatibility is calculated automatically from the manufacturers’ technical data and is for information only. For complex systems, we recommend having the configuration checked by a consultant before ordering. Details in the Terms and conditions

Other products in the same category