List of products by brand VICTRON ENERGY

M8 circular connector Male/Female 3 pole cable 5 m is an extension for BMS communication cables, supplied in a bag of 2. It works with Lithium Smart batteries and Smart BMS, or Lithium NG and NG BMS.

M8 circular connector Male/Female 3 pole cable 3 m is an extension for BMS communication cables, supplied in a bag of 2. It works with Lithium Smart batteries and Smart BMS, or Lithium NG and NG BMS.

VE.Direct TX digital output cable is a cable used in combination with BlueSolar and SmartSolar MPPT solar chargers. It supports solar lighting applications and a virtual load output.

Skylla-i remote on-off cable is a cable that connects a Skylla-i charger to a VE.Bus BMS. Through this link the VE.Bus BMS disables the Skylla-i charger when the batteries are fully charged.

Non-inverting remote on-off cable is a cable that connects Skylla-TG chargers and Battery Protect models BP40i, BP60i and BP200i to a VE.Bus BMS, translating its remote on/off signal to the logic these products need.

Inverting remote on-off cable is a control cable that connects Phoenix inverters rated 3 kVA and more and all Multi, MultiPlus and Quattro units to a VE.Bus BMS or to the load output of a BlueSolar MPPT charger.

GlobalLink 520 is a remote monitoring device with an LTE-M modem that provides plug-and-play connectivity to the VRM portal for Victron products with a VE.Direct port. It is intended for off-grid systems on the road or at sea and includes five years of connectivity without monthly fees or subscriptions, with the option to extend.

GlobalLink 530 is a remote monitoring device fitted with a 4G modem with 2G fallback, providing reliable coverage in many parts of the world. It offers plug-and-play connectivity to the VRM portal for Victron VE.Direct devices, with no monthly fees or subscriptions for five years and the option to extend afterwards.

VE.Direct to USB-C interface is a cable that connects products with a VE.Direct port to devices with a USB port, such as a computer. It also allows more than two VE.Direct products to be connected to a single CCGX.

VE.Direct to RS232 interface is a Victron interface cable that connects a product with a VE.Direct port to equipment with an RS232 port, providing data communication between the two connection types.

VE.Bus Smart dongle is a Bluetooth accessory for Victron inverter/chargers with a VE.Bus port, such as the MultiPlus, MultiPlus-II, Quattro or Phoenix VE.Bus inverters. Through the VictronConnect app it allows the system to be monitored and operated, and it also works as a voltage and temperature sense device. It suits caravans, motorhomes and smaller yachts.

RS232 to USB converter is an adapter that connects Victron products with an RS232 port to a device with a USB inlet, such as a computer or a GX device. It is used for configuration, monitoring or system integration.

VE.Can to NMEA2000 Micro-C male cable is a cable for connecting a Victron product with a VE.Can port to an NMEA 2000 network. Installation details are given in the NMEA 2000 & MFD integration guide.

VE.Bus BMS to BMS 12-200 alternator control cable is a cable that links a VE.Bus BMS to a Smart BMS 12/200. The BMS 12/200 then limits the alternator current and stops charging on a battery alarm.

RJ12 UTP Cable 30 m is a cable that connects the shunt of a BMV battery monitor to its display unit. It replaces the standard 10 m cable supplied with the BMV when that cable is too short.

Interface MK3-USB-C is a VE.Bus to USB-C adapter that connects products such as the Multi, MultiPlus-II, Quattro, EasySolar or VE.Bus BMS V2 to a computer for configuration and firmware updates.

RJ12 UTP Cable 1.8 m is a cable that connects the shunt of a BMV battery monitor to its display unit. It replaces the standard 10 m cable supplied with the BMV when that cable is too long.

RJ12 UTP Cable 10 m is a cable that connects the shunt of a BMV battery monitor to its display unit. It has the same length as the standard cable supplied with the BMV and can serve as a replacement.

RJ12 UTP Cable 15 m is a cable that connects the shunt of a BMV battery monitor to its display unit. It replaces the standard 10 m cable supplied with the BMV when that cable is too short.

RJ12 UTP Cable 5 m is a cable that connects the shunt of a BMV battery monitor to its display unit. It replaces the standard 10 m cable supplied with the BMV when that cable is too long.