Cookie consent

We use cookies that the shop needs to work and, only with your consent, statistics and marketing cookies.

Learn more
  • -15%
MPPT solar charge controller Victron Energy BlueSolar 75/10, 10 A

MPPT solar charge controller Victron Energy BlueSolar 75/10, 10 A

€55 Save €9
€46 Tax included

€38 Tax excluded

BlueSolar MPPT 75/10 is an MPPT solar charge controller with a rated charge current of 10 A, a maximum PV open-circuit voltage of 75 V and a maximum efficiency of 98 %. It is used with 12 V and 24 V batteries and communicates via VE.Direct (a Bluetooth dongle can be added). Protection rating: IP22 (connection area), IP43 (electronic components).

Reference SCC010010050R

Victron Energy commercial warranty: 5 years for defects in materials and workmanship, handled through us as the seller. In addition to the legal guarantee. Conditions

Your legal guarantee rights

Legal guarantee

EU harmonised notice on the legal guarantee of conformity

More information: europa.eu/youreurope/guarantees
Open the notice at full size

BlueSolar MPPT 75/10 - MPPT solar charge controller, 10 A

BlueSolar MPPT 75/10 is an MPPT solar charge controller that collects the energy from the photovoltaic panels and stores it in the batteries. It has a rated charge current of 10 A, a maximum PV open-circuit voltage of 75 V and a maximum efficiency of 98 %, for 12 V and 24 V batteries. It communicates via VE.Direct.

Key features:

  • Rated charge current: 10 A
  • Battery voltage: 12 V and 24 V
  • Rated PV power: 145 W (12 V), 290 W (24 V)
  • Maximum PV open-circuit voltage: 75 V
  • Maximum efficiency: 98 %
  • Communication: VE.Direct
  • Protection rating: IP22 (connection area), IP43 (electronic components)

MPPT technology tracks the maximum power point extremely fast: by constantly monitoring the voltage and output current of the solar panels, it extracts the available energy. The advantage is most noticeable when the sky is partly cloudy and the light intensity changes constantly. For the controller to start, the PV voltage must exceed Vbat + 5 V; after that, the minimum PV voltage is Vbat + 1 V.

Remote monitoring and control are done by attaching a VE.Direct to Bluetooth Smart dongle and pairing it with a smartphone or another device through the VictronConnect app (iOS and Android). If the installation is connected to the internet through a GX device, the Victron Remote Management (VRM) portal is available; for installations without an internet connection, the GlobalLink 520 device can be used. The charge algorithm is fully programmable and eight preprogrammed algorithms are available, selectable with a rotary switch.

Protections include over-temperature, with power reduction at high temperature, short circuit, PV reverse polarity and PV reverse current. The internal temperature sensor compensates the absorption and float voltage according to temperature. The load output supports a maximum continuous current of 15 A, with automatic load disconnect at low voltage.

Technical specifications

Rated charge current10 A
Rated PV power (12 V)145 W
Rated PV power (24 V)290 W
Absorption charge voltage14.4V / 28.8V (adjustable)
Float charge voltage13.8V / 27.6V (adjustable)
Temperature compensation (12 V)-16 mV/°C
Temperature compensation (24 V)-32 mV/°C
Maximum efficiency98 %
Self-consumption (load output on)12V: 25 mA / 24V: 15 mA
Self-consumption (load output off)12V: 25 mA / 24V: 15 mA
Maximum PV open-circuit voltage75 V
PV start-up voltageThe PV voltage must exceed Vbat + 5V for the controller to start. After that, the minimum PV voltage is Vbat + 1V
Number of MPPT trackers1
Maximum PV short-circuit current13 A
Maximum continuous load current (12 V)15 A
Low-voltage load disconnect11.1V / 22.2V or 11.8V / 23.6V or BatteryLife algorithm
Load reconnect after low voltage13.1V / 26.2V or 14V / 28V or BatteryLife algorithm
ProtectionsAutomatic load disconnect, over-temperature, output short circuit, reverse polarity at the panels
Operating temperature range-30 … 60 °C
Maximum humidity95 %
BluetoothNo
Data communicationVE.Direct
Battery terminalsScrew terminals 6 mm² (10 AWG)
PV terminalsScrew terminals 6 mm² (10 AWG)
Load terminalsScrew terminals 6 mm² (10 AWG)
ColourBlue (RAL 5012)
Protection ratingIP22 (connection area), IP43 (electronic components)
Weight0.5 kg
Height100 mm
Width113 mm
Depth40 mm
SafetyCSA C22.2, EN-IEC 62109-1, UL 1741

Data sheet

Reference
SCC010010050R
Brand
Victron Energy
Product type
MPPT controller
Maximum efficiency
98 %
Battery voltage
12 V
24 V
Charge current class
0-10 A
Max. charge current
10 A
Absorption charge voltage
14.4/28.8 V
Float charge voltage
13.8/27.6 V
Max. PV voltage (Voc)
75 V
Max. PV short-circuit current
13 A
Max. PV power (by battery voltage)
145 W (12 V), 290 W (24 V)
Bluetooth (app)
No
Communication interfaces
VE.Direct
Protections
Output short-circuit, overtemperature, PV reverse polarity, automatic load disconnect
Dimensions (H x W x D)
100 x 113 x 40 mm
Weight
0.5 kg
Ingress protection (IP)
IP22 (connection area), IP43 (electronics)
Operating temperature
-30 ... 60 °C
Max. relative humidity
95 %
Colour
Blue
Standards and compliance
CSA C22.2, EN-IEC 62109-1, UL 1741

We took these technical data from the manufacturer’s datasheet; transcription errors are possible. For 100% accuracy, please consult the attached datasheet.

Compatibility

Other compatible products

Compatibility is calculated automatically from the manufacturers’ technical data and is for information only. For complex systems, we recommend having the configuration checked by a consultant before ordering. Details in the Terms and conditions

Other products in the same category