Cookie consent

We use cookies that the shop needs to work and, only with your consent, statistics and marketing cookies.

LiFePO4 Battery 25,6V/200Ah NG Victron Energy

25.6 V
€2,329 Save €350
€1,979 Tax included

€1,649 Tax excluded

Lithium NG 25.6V/200Ah is a lithium iron phosphate (LiFePO4) battery with a nominal energy of 5120 Wh, designed for 24 V off-grid, residential and mobile systems. It features an integrated shunt, cell balancing and cell monitoring and an IP65 enclosure. It must be used with a Lynx Smart BMS NG, purchased separately, for monitoring via VictronConnect, a GX device or the VRM portal.

Reference BAT524120620

Victron Energy commercial warranty: 3 years for defects in materials and workmanship, handled through us as the seller. In addition to the legal guarantee. Conditions

Lithium NG 25.6V/200Ah - LiFePO4 battery 24V 5.12 kWh

Lithium NG 25.6V/200Ah is a lithium iron phosphate (LiFePO4) battery with a nominal energy of 5120 Wh, designed for 24 V off-grid, residential and mobile systems. It features an integrated shunt, cell balancing and cell monitoring and an IP65 enclosure. It must be used with a Lynx Smart BMS NG, purchased separately, for monitoring via VictronConnect, a GX device or the VRM portal.

Main features:

  • Nominal voltage: 25.6 V
  • Nominal capacity: 200 Ah, 5120 Wh at 25 °C
  • Cycle life: 2500 cycles at 80 % DoD
  • Max continuous current: 200 A charge and discharge (1C)
  • Configuration: Series, parallel or series-parallel, max. 50 batteries per BMS
  • Protection class: IP65

Battery management system:

The battery has integrated cell balancing and cell monitoring. The balancing and monitoring cables are daisy-chained and must be connected to a Lynx Smart BMS NG 500 A / 1000 A, mandatory and purchased separately. The BMS:

  • generates a pre-alarm when the voltage of a cell drops below 3.0 V
  • disconnects or shuts down the loads when the voltage of a cell drops below 2.8 V
  • stops charging when the voltage of a cell exceeds 3.6 V or when the temperature is too high or too low

The battery firmware is updated automatically by the BMS.

Remote monitoring and control:

The integrated shunt sends the battery voltage, current and temperature to the BMS, which calculates the state of charge and issues warnings and alarms. The BMS automatically detects the system voltage and the number of batteries connected in series, parallel or series-parallel.

Monitoring takes place via VictronConnect (Bluetooth built into the BMS), a GX device or the VRM portal: cell status and voltages, current and temperatures in real time.

Construction and mounting:

  • IP65: sealed against dust and resistant to low-pressure water jets
  • Mounting brackets included: secure fixing against slipping and tipping over
  • Mounting position: upright or on its side, but not with the terminals facing down
  • Power connection: M8 (threaded inserts and bolts)
  • Repairable: cover removable with screws

Technical specifications

Nominal voltage25.6 V
Nominal capacity at 25 °C200 Ah
Nominal energy at 25 °C5120 Wh
Round trip efficiency92 %
Cycle life at 80 % DoD2500 cycles
Cycle life at 70 % DoD3000 cycles
Cycle life at 50 % DoD5000 cycles
Max continuous discharge current200 A (1C)
Max pulse discharge current (10 s)400 A (2C)
End of discharge voltage22.4 V
Charge voltage28-28.8 V
Float voltage27 V
Max continuous charge current200 A (1C)
Max pulse charge current (10 s)400 A (2C)
BMSLynx Smart BMS NG 500 A / 1000 A (M10 busbars), purchased separately
Cell measurementsCell voltages and temperatures, battery current
BMS interfaceMale + female cable with M8 circular connector, high-speed digital communication, 50 cm
AlarmPre-alarm contact on BMS
BluetoothIn the BMS
Max batteries per BMS50 (up to 384 kWh per BMS)
Firmware updatesAutomatically by the BMS
RepairableYes (cover removable with screws)
Operating temperatureDischarge: -20 °C to +50 °C, charge: +5 °C to +50 °C
Storage temperature-45 °C to +70 °C
Humidity (non-condensing)Max. 95 %
Protection classIP65
Mounting optionsStrap or mounting brackets (brackets included)
Mounting on its sideYes, but not with the terminals facing down
Self-discharge rate≤ 3 % per month at 25 °C
Power connectionM8 (threaded inserts and bolts)
Dimensions (h x w x d)235 x 648 x 162 mm
Weight (estimated)37 kg
SafetyCells: UL1973, UL9540A, IEC62619; battery: IEC 62619 (pending), UL 2054 (certified with Lynx BMS NG)
EMCEN 61000-6-3, EN 61000-6-2
AutomotiveECE R10-6
PerformanceIEC 62620

Data sheet

Reference
BAT524120620
EAN13
8719076058946
Brand
Victron Energy
Product type
Battery
Battery chemistry
LiFePO4 (lithium iron phosphate)
Battery voltage
24 V
Nominal voltage (exact)
25.6 V
Nominal capacity
200 Ah
Capacity class
2.5-6 kWh
Nominal energy
5.12 kWh
Cycle life (cycles at 80 % DoD)
2500 cycles
Max. continuous discharge current
200 A
Built-in BMS
No
Max. charge current
200 A
Dimensions (H x W x D)
235 x 648 x 162 mm
Weight
37 kg
Ingress protection (IP)
IP65
Operating temperature
-20 ... 50 °C
Max. relative humidity
95 %
Colour
Blue
Standards and compliance
Cells: UL1973, EMC: EN 61000-6-3, EN 61000-6-2, Automotive: ECE R10-6

We took these technical data from the manufacturer’s datasheet; transcription errors are possible. For 100% accuracy, please consult the attached datasheet.

Compatibility

Other compatible products

Compatibility is calculated automatically from the manufacturers’ technical data and is for information only. For complex systems, we recommend having the configuration checked by a consultant before ordering. Details in the Terms and conditions

Other products in the same category