Cookie consent

We use cookies that the shop needs to work and, only with your consent, statistics and marketing cookies.

Learn more
  • -15%
Inverter/charger Victron Energy Quattro 12/5000/220-100/100, 230 V

Inverter/charger Victron Energy Quattro 12/5000/220-100/100, 230 V

€2,932 Save €440
€2,492 Tax included

€2,077 Tax excluded

Quattro 12/5000/220-100/100 is an inverter/charger with two AC inputs for 12 V batteries, with continuous power of 5000 VA (4000 W) at 25 °C, peak power of 10000 W and a maximum charge current of 220 A. It features PowerControl, PowerAssist, parallel and three-phase operation and VE.Bus communication.

Reference QUA125020000

Victron Energy commercial warranty: 5 years for defects in materials and workmanship, handled through us as the seller. In addition to the legal guarantee. Conditions

Your legal guarantee rights

Legal guarantee

EU harmonised notice on the legal guarantee of conformity

More information: europa.eu/youreurope/guarantees
Open the notice at full size

Quattro 12/5000/220-100/100 - Inverter/charger with two AC inputs, 12 V, 5 kVA

Quattro 12/5000/220-100/100 is an inverter/charger with two AC inputs for 12 V batteries, combining a 5 kVA pure sine wave inverter and an adaptive charger with a maximum charge current of 220 A. It can be connected to two independent AC sources and switches automatically to the active source. It features PowerAssist hybrid technology and a UPS function, and communicates via VE.Bus.

Main features:

  • Battery voltage: 12 V
  • Continuous power: 5000 VA / 4000 W at 25 °C
  • Peak power: 10000 W
  • Charge current: 220 A
  • AC inputs: 2, 187-250 V, pass-through current 2x 100A
  • Maximum efficiency: 94 %
  • Communication: VE.Bus

The Quattro can be connected to two independent AC sources, for example shore power and a generator, or two generators, and switches automatically to the active source. The main output works without interruption: if the grid fails or the shore power or generator is disconnected, the Quattro takes over supplying the connected loads in less than 20 milliseconds, so computers and other electronic equipment keep running.

The second output is active only when AC power is present on one of the inputs. Loads that should not drain the battery, such as an air conditioner or a water heater, can be connected to it. The PowerAssist function prevents overloading a limited AC source: first the battery charging is reduced, then the source output is boosted with energy from the battery. Up to 6 Quattro units can operate in parallel; three-phase or split-phase operation is also possible.

Combined with a GX device (for example Cerbo GX), the system can be monitored and controlled locally (LAN) or remotely over the internet, using the free VRM app and the VRM portal, from a phone, tablet, laptop or PC. The level of control is extensive, from adjusting the unit to automatically starting a backup generator.

Technical specifications

Nominal battery voltage12 V
PowerControlYes
PowerAssistYes
Parallel operationYes
Three-phase operationYes
Built-in transfer switchYes
Number of AC inputs2
AC input voltage range187 … 250 V
AC input frequency range50 … 60 Hz
Maximum pass-through current2x 100A
Icw10000 A
DC input voltage range9.5 … 17 VDC
AC output voltage230 VAC
AC output frequency50 Hz
Continuous output power at 25 °C (VA)5000 VA
Continuous output power at 25 °C (W)4000 W
Continuous output power at 40 °C3700 W
Continuous output power at 65 °C3000 W
Peak power10000 W
DC input current458 A
Maximum AC output current19 A
Maximum AC output current in fault condition53 A
Maximum efficiency94 %
No-load consumption30 W
No-load consumption in AES mode20 W
No-load consumption in search mode10 W
Absorption charge voltage14.4 VDC
Float charge voltage13.8 VDC
Storage mode charge voltage13.2 VDC
Charge algorithmAdaptive, 4-stage
Maximum battery charge current220 A
Starter battery charge current4 A
Temperature sensorIncluded
Auxiliary outputYes
Programmable relayAC ratings: 230V / 4A, DC ratings: 4A to 35VDC and 1A to 60VDC
ProtectionsOutput short circuit, Overload, High battery voltage, Low battery voltage, Over-temperature, AC voltage at inverter output, Excessive DC ripple
Communication portVE.Bus
General-purpose communication portYes
Remote control terminalOn / Off / Charger only
Operating temperature range-20 … 60 °C
Fan-assisted coolingYes
Maximum humidity95 %
Maximum altitude2000 m
AC connection terminalsM6 screws
Battery connection terminalsM8 screws (two for the positive connection and two for the negative)
Remote terminal typeTwo-pole screw terminal
Relay terminalThree-pole screw terminal
VE.Bus terminal typeTwo RJ45 connectors
MaterialAluminium
ColourBlue (RAL 5012)
Protection ratingIP20
Pollution degree2
OVC III / rated short-time withstand current (Icw)Yes
Weight34 kg
Height470 mm
Width350 mm
Depth280 mm
SafetyEN-IEC 60335-1, EN-IEC 60335-2-29, EN-IEC 62109-1
Emission and immunityEN 55014-1, EN 55014-2, EN-IEC 61000-3-2, EN-IEC 61000-3-3, EN-IEC 61000-6-1, EN-IEC 61000-6-2, EN-IEC 61000-6-3
Automotive directiveECE R10-4
Anti-islanding standardSee our website

Data sheet

Reference
QUA125020000
Brand
Victron Energy
Product type
Inverter/charger
Inverter type
Inverter/charger
Phases
Single-phase
Power class
3.5-6 kW
Continuous output power (VA, 25 °C)
5000 VA
Continuous output power (W, 25 °C)
4000 W
Peak power
10000 W
Maximum efficiency
94 %
Zero-load power
30 W
Output waveform
Pure sine wave
Battery voltage
12 V
DC input voltage range
9.5-17 V
Max. charge current
220 A
AC output voltage
230 V
Output frequency
50 Hz
AC input voltage range
187-250 V
Max. AC input current
100 A
Parallel operation
Yes
Communication interfaces
VE.Bus
Programmable relay
Yes
Protections
Output short-circuit, overload, overtemperature, high battery voltage, low battery voltage, excessive DC ripple, AC voltage on output
Dimensions (H x W x D)
470 x 350 x 280 mm
Weight
34 kg
Ingress protection (IP)
IP20
Operating temperature
-20 ... 60 °C
Max. relative humidity
95 %
Colour
Blue
Material
Aluminium
Standards and compliance
EN-IEC 60335-1, ECE R10-4, EN 55014-1, EN 55014-2

We took these technical data from the manufacturer’s datasheet; transcription errors are possible. For 100% accuracy, please consult the attached datasheet.

Compatibility

Other compatible products

Compatibility is calculated automatically from the manufacturers’ technical data and is for information only. For complex systems, we recommend having the configuration checked by a consultant before ordering. Details in the Terms and conditions

Other products in the same category