Cookie consent

We use cookies that the shop needs to work and, only with your consent, statistics and marketing cookies.

Learn more
  • New
  • -15%
MultiPlus-II 12/4k/160-32 230V Victron Energy

Inverter/charger Victron Energy MultiPlus-II 12/4k/160-32 230V, 12 V, 4 kVA

€1,563 Save €235
€1,328 Tax included

€1,107 Tax excluded

MultiPlus-II 12/4k/160-32 230V is a multifunctional inverter/charger with two AC outputs, suitable for marine, vehicle and off-grid applications as well as for ESS installations. PowerControl prevents overloading of the grid or generator, PowerAssist supplements the power at peak demand, and in a grid outage the switchover takes place within milliseconds. It charges 12 V batteries at up to 160 A.

Reference PMP122405010

Victron Energy commercial warranty: 5 years for defects in materials and workmanship, handled through us as the seller. In addition to the legal guarantee. Conditions

Your legal guarantee rights

Legal guarantee

EU harmonised notice on the legal guarantee of conformity

More information: europa.eu/youreurope/guarantees
Open the notice at full size

MultiPlus-II 12/4k/160-32 230V - 12 V inverter/charger with 2 AC outputs

MultiPlus-II 12/4k/160-32 230V is a multifunctional inverter/charger with two AC outputs, suitable for marine, vehicle and off-grid applications as well as for ESS installations. PowerControl prevents overloading of the grid or generator, PowerAssist supplements the power at peak demand, and in a grid outage the switchover takes place within milliseconds. It charges 12 V batteries at up to 160 A.

Key features:

  • Battery voltage: 12 V (9.5-17 V)
  • Continuous power: 3400 W at 25 °C, peak 6000 W
  • Charging current: 160 A, adaptive 4-stage algorithm
  • Transfer relay: 32 A
  • Maximum efficiency: 93%
  • Second AC output: for loads that must not discharge the battery

The MultiPlus-II is a multifunctional inverter/charger with two AC outputs. Suited to professional marine, yachting, vehicle and off-grid land-based systems, it also provides the isolation and redundancy required for ESS configurations. PowerControl enables the MultiPlus-II to prevent overloading of the grid or generator, while PowerAssist increases the AC power during consumption peaks. In the event of a power failure, the inverter switches over within milliseconds, keeping computers and sensitive electronic equipment running without interruption. The battery charger combines speed with efficiency through an intelligent adaptive algorithm that extends battery life. Equipped for expansion, the MultiPlus-II supports parallel and three-phase configurations when the system needs to be scalable.

Note: for a short period of time, this product was called MultiGrid-II.

Technical specifications

Nominal battery voltage12 V
PowerControlYes
PowerAssistYes
Parallel operationYes
Three-phase operationYes
Number of AC inputs1
AC input voltage range (2)187 … 265 VAC
Frequency selection50Hz
Transfer switch rated current32 A
Maximum AC input current32 A
DC input voltage range9.5 … 17 VDC
AC output voltage230 VAC
AC output frequency50 Hz
Short name4k
Continuous output power at 25 °C (W)3400 W
Continuous output power at 40 °C3100 W
Continuous output power at 65 °C2600 W
Peak power6000 W
Maximum apparent power fed in3400 W
Maximum efficiency93 %
No-load consumption18 W
No-load consumption in AES mode11 W
No-load consumption in search mode4 W
AC input voltage range187 … 265 VAC
AC input frequency range45 … 65 Hz
Charge voltage in absorption14.4 VDC
Float charge voltage13.8 VDC
Storage mode charge voltage13.2 VDC
Charging algorithmAdaptive, 4-stage
Maximum battery charge current160 A
Starter battery charging outputYes
Starter battery charging current4 A
Temperature sensorIncluded
Auxiliary outputYes
External AC current sensor50 A or 100 A (optional)
Programmable relayAC ratings: 230 V / 4 A, DC ratings: 4 A up to 35 VDC and 1 A up to 60 VDC
ProtectionsOutput short circuit, Overload, High battery voltage, Low battery voltage, Over-temperature, AC voltage at inverter output, Excessive DC ripple
Communication portVE.Bus
General-purpose communication portYes
Remote control terminalOn / Off
Programmable by computerYes
Operating temperature range-40 … 65 °C
Fan-assisted coolingYes
Maximum humidity95 %
Maximum altitude4000 m
AC connection terminalsScrew terminals 13 mm² (6 AWG)
Battery connection terminalsM8 screws (two for the positive connection and two for the negative)
Remote terminal typeTwo-pole screw terminal
Relay terminalThree-pole screw terminal
VE.Bus terminal typeTwo RJ45 terminals
MaterialSteel
ColourBlue (RAL 5012)
Ingress protectionIP21
Weight22 kg
Height576 mm
Width276 mm
Depth164 mm
SafetyEN-IEC 60335-1, EN-IEC 60335-2-29, EN-IEC 62109-1, EN-IEC 62109-2
Emission and immunityEN 55014-1, EN 55014-2, EN-IEC 61000-3-2, EN-IEC 61000-3-3, EN-IEC 61000-6-1, EN-IEC 61000-6-2, EN-IEC 61000-6-3
Anti-islanding standardPlease refer to the certificates on our website
UPS standardPlease refer to the certificates on our website

Data sheet

Reference
PMP122405010
EAN13
8719076072058
Brand
Victron Energy
Product type
Inverter/charger
Inverter type
Inverter/charger
Phases
Single-phase
Power class
3.5-6 kW
Continuous output power (W, 25 °C)
3400 W
Peak power
6000 W
Maximum efficiency
93 %
Zero-load power
18 W
Output waveform
Pure sine wave
Battery voltage
12 V
DC input voltage range
9.5-17 V
Max. charge current
160 A
AC output voltage
230 V
Output frequency
50 Hz
AC input voltage range
187-265 V
Max. AC input current
32 A
Parallel operation
Yes
Communication interfaces
VE.Bus
Programmable relay
Yes
Protections
Output short-circuit, overload, overtemperature, high battery voltage, low battery voltage, excessive DC ripple, AC voltage on output
Dimensions (H x W x D)
576 x 276 x 164 mm
Weight
22 kg
Ingress protection (IP)
IP21
Operating temperature
-40 ... 65 °C
Max. relative humidity
95 %
Colour
Blue
Material
Steel
Standards and compliance
EN-IEC 60335-1, EN 55014-1, EN 55014-2, EN-IEC 61000-3-2

We took these technical data from the manufacturer’s datasheet; transcription errors are possible. For 100% accuracy, please consult the attached datasheet.

Compatibility

Other compatible products

Compatibility is calculated automatically from the manufacturers’ technical data and is for information only. For complex systems, we recommend having the configuration checked by a consultant before ordering. Details in the Terms and conditions

Other products in the same category