ALL PRODUCTS

Dual Terminal Stud M8 Linked Set (1 Red/1 Black) contains two M8 dual terminal studs, one red and one black, linked with tin-plated copper, for DC connections up to 150 A and 70 V.

Busbar 250A 2P with 12 Screws and Cover is a tin-plated copper busbar for current distribution in DC systems up to 70 V and 250 A. It has 12 connection screws and a removable black cover.

VE.Net GMDSS Panel is a digital panel that displays data and alarms from the Skylla-TG 24/30 and 24/50 GMDSS chargers. It connects to the charger with a standard eight-wire UTP cable.

Busbar 250A 6P with Cover is a tin-plated copper busbar for current distribution in DC systems up to 70 V and 250 A. It has six high-current connections with 8 mm studs and a removable black cover.

Busbar 150A 2P with 20 Screws and Cover is a tin-plated copper busbar for current distribution in DC systems up to 70 V and 150 A. It has 20 connection screws and a removable clear cover.

Skylla-TG 24/50(1+1) 3-Phase 400V is a 24 V battery charger with a nominal charge current of 50 A, supplied from a three-phase 3 x 400 V network. It has a main output and a 4 A output for a starter battery, a three-stage IUoU algorithm and an included temperature sensor. It is intended for three-phase installations and battery banks of 250-500 Ah.

Busbar 250A 2P with 6 Screws and Cover is a tin-plated copper busbar for current distribution in DC systems up to 70 V and 250 A. It has 6 connection screws and a removable black cover.

Busbar 150A 2P with 10 Screws and Cover is a tin-plated copper busbar for current distribution in DC systems up to 70 V and 150 A. It has 10 connection screws and a removable clear cover.

Solar Panel 45W-12V Series 4a is a 45 W polycrystalline photovoltaic module with 36 cells, measuring 425 x 668 x 25 mm. It delivers 2.36 A at 19.1 V at the maximum power point, with an open-circuit voltage of 22.9 V. It is suited to charging 12 V batteries in small solar systems through a charge controller.

Skylla-TG 24/100(1+1) 3-Phase 400V is a 24 V battery charger with a nominal charge current of 100 A, supplied from a three-phase 3 x 400 V network. It has a main output and a 4 A output for a starter battery, a three-stage IUoU algorithm and an included temperature sensor. It is intended for three-phase installations and battery banks of 500-1000 Ah.

Solar Panel 235W-72 Cells Series 4d is a 235 W monocrystalline photovoltaic module measuring 1350 x 880 x 30 mm, intended for larger solar installations. A low voltage-temperature coefficient supports operation in heat, and EVA encapsulation with a triple-layer back sheet meets safety requirements for high-voltage operation. The anodized aluminium frame allows mounting with standard systems.

Skylla-IP65 24/35(1+1) 120-240V is a 24 V, 35 A battery charger with a waterproof IP65 enclosure and a universal 90-265 V input that keeps full output power on any grid. The adaptive 7-stage algorithm includes a dedicated Li-ion profile. It has one full-rated output plus an isolated 3 A starter battery output. It suits marine, mobile and industrial applications exposed to heat, humidity and salt air.

Solar Panel 365W-72 Cells Series 4c is a 365 W monocrystalline photovoltaic module measuring 1980 x 880 x 35 mm, intended for larger solar installations. A low voltage-temperature coefficient supports operation in heat, and EVA encapsulation with a triple-layer back sheet meets safety requirements for high-voltage operation. The anodized aluminium frame allows mounting with standard systems.

Solar Panel 190W-39 Cells Series 4c is a 190 W monocrystalline photovoltaic module measuring 1485 x 668 x 30 mm, with a sturdy anodized aluminium frame that is easy to roof-mount with standard systems. High-transmission tempered glass adds stiffness and impact resistance, while bypass diodes limit losses under shading. It is used in off-grid systems on vehicles, boats or cabins.

Skylla-IP65 24/35(3) 120-240V is a 24 V, 35 A battery charger with a waterproof IP65 enclosure and a universal 90-265 V input that keeps full output power on any grid. The adaptive 7-stage algorithm includes a dedicated Li-ion profile. It has three full-rated outputs. It suits marine, mobile and industrial applications exposed to heat, humidity and salt air.

Solar Panel 150W-12V Series 4a is a 150 W monocrystalline photovoltaic module for 12 V systems, measuring 1485 x 668 x 30 mm. Bypass diodes reduce losses under shading, while tempered glass and an anodized aluminium frame provide stiffness and easy roof mounting. It is suited to charging 12 V batteries in off-grid systems.

Solar Panel 130W-36 Cells Series 4c is a 130 W monocrystalline photovoltaic module measuring 1020 x 668 x 30 mm, with a sturdy anodized aluminium frame that is easy to roof-mount with standard systems. High-transmission tempered glass adds stiffness and impact resistance, while bypass diodes limit losses under shading. It is used in off-grid systems on vehicles, boats or cabins.

Skylla-IP65 12/70(3) 120-240V is a 12 V, 70 A battery charger with a waterproof IP65 enclosure and a universal 90-265 V input that keeps full output power on any grid. The adaptive 7-stage algorithm includes a dedicated Li-ion profile. It has three full-rated outputs. It suits marine, mobile and industrial applications exposed to heat, humidity and salt air.

Skylla-IP65 12/70(1+1) 120-240V is a 12 V, 70 A battery charger with a waterproof IP65 enclosure and a universal 90-265 V input that keeps full output power on any grid. The adaptive 7-stage algorithm includes a dedicated Li-ion profile. It has one full-rated output plus an isolated 3 A starter battery output. It suits marine, mobile and industrial applications exposed to heat, humidity and salt air.

Skylla-i 24/100(3) 230V is a 24 V, 100 A battery charger with an adaptive 7-stage algorithm, BatterySafe mode against excessive gassing and Storage mode for periods of non-use. It has three full-rated outputs for up to three battery banks. It has a VE.Can (NMEA 2000) port, PowerControl to limit shore current, and is Li-ion (LiFePO4) ready.