€96 Tax excluded
The Sun Inverter 24/250-10 IEC is a 24 V sine-wave inverter with an integrated PWM solar charge controller in a single, easy-to-install enclosure. It delivers 200 W continuous and 400 W peak at 230 V AC, for household equipment powered by 24 V batteries charged from solar panels. The parameters can be read via Bluetooth in VictronConnect, and the VE.Direct port allows connection to a GX device.
Victron Energy commercial warranty: 5 years for defects in materials and workmanship, handled through us as the seller. In addition to the legal guarantee. Conditions
The Sun Inverter 24/250-10 IEC is a 24 V sine-wave inverter with an integrated PWM solar charge controller in a single, easy-to-install enclosure. It delivers 200 W continuous and 400 W peak at 230 V AC, for household equipment powered by 24 V batteries charged from solar panels. The parameters can be read via Bluetooth in VictronConnect, and the VE.Direct port allows connection to a GX device.
The solar inverter combines a sine-wave inverter and a PWM solar charger in a single, easy-to-install enclosure that needs minimal wiring.
The inverter lets you power household equipment that requires 230 VAC from leisure or automotive batteries of 12 V or 24 V.
The solar charger charges the batteries with the energy collected from the solar panels. The charging algorithm is programmable.
The inverter and solar charger parameters can be read via Bluetooth in the VictronConnect app. In addition, the inverter has a VE.Direct port for connecting to a GX device or to a GlobalLink 520 for system monitoring.
| Nominal battery voltage | 24 V |
|---|---|
| Continuous output power at 25 °C (W) | 200 W |
| Continuous output power at 40 °C | 175 W |
| Peak power | 400 W |
| AC output voltage | 230 V |
| Frequency selection | 50 Hz or 60 Hz |
| DC input voltage range | 18.4 … 34 V |
| Low DC voltage shutdown | 18.6 V |
| Low DC voltage restart and alarm | 21.8 V |
| Dynamic low DC voltage shutdown | Yes |
| Battery charged detection voltage | 28 V |
| Maximum efficiency | 88 % |
| No-load consumption | 5.2 W |
| No-load consumption in ECO mode | 1.3 W |
| PWM included | Yes |
| Solar technology | Pulse width modulation (PWM) |
| Solar panel type | 72-cell solar panel, Two 36-cell solar panels in series |
| Charging voltages | Adjustable, with temperature compensation |
| Temperature sensor | Optional (Smart Battery Sense) |
| Protections | Output short circuit, Overload, High battery voltage, Low battery voltage, Over-temperature, Excessive DC ripple |
| Bluetooth | Yes |
| Remote on/off terminal | Yes |
| Communication port | Bluetooth, VE.Direct |
| Fully programmable | Yes |
| Operating temperature range | -40 … 60 °C |
| Derating | 1.25 %/°C |
| Maximum humidity | 95 % |
| AC output socket | IEC-320 (male plug included) |
| Battery connection terminals | Screw terminals 10 mm² (8 AWG) |
| PV connection terminals | Screw terminals 4 mm² (12 AWG) |
| Remote control terminal | Two-pole screw terminal |
| Colour | Blue (RAL 5012) |
| Material | Steel chassis and plastic cover |
| Protection rating | IP21 |
| Weight | 2.4 kg |
| Height | 86 mm |
| Width | 165 mm |
| Depth | 260 mm |
| Safety | EN-IEC 60335-1, EN-IEC 62109-1 |
| EMC | EN 55014-1, EN 55014-2, EN-IEC 61000-6-1, EN-IEC 61000-6-2, EN-IEC 61000-6-3 |
| Automotive directive | ECE R10-4, EN 50498 |
We took these technical data from the manufacturer’s datasheet; transcription errors are possible. For 100% accuracy, please consult the attached datasheet.
Compatibility is calculated automatically from the manufacturers’ technical data and is for information only. For complex systems, we recommend having the configuration checked by a consultant before ordering. Details in the Terms and conditions
