• New
Skylla-i 24/80(3) 230V Victron Energy
  • New
   

Skylla-i 24/80(3) 230V Victron Energy

€1,295.00
Tax excluded

Skylla-i 24/80(3) 230V is a 24 V, 80 A battery charger with an adaptive 7-stage algorithm, BatterySafe mode against excessive gassing and Storage mode for periods of non-use. It has three full-rated outputs for up to three battery banks. It has a VE.Can (NMEA 2000) port, PowerControl to limit shore current, and is Li-ion (LiFePO4) ready.

: VICTRON ENERGY
Quantity

Skylla-i 24/80(3) 230V - Battery charger 24V 80A with VE.Can

Skylla-i 24/80(3) 230V is a 24 V, 80 A battery charger with an adaptive 7-stage algorithm, BatterySafe mode against excessive gassing and Storage mode for periods of non-use. It has three full-rated outputs for up to three battery banks. It has a VE.Can (NMEA 2000) port, PowerControl to limit shore current, and is Li-ion (LiFePO4) ready.

Main features:

  • Battery voltage: 24 V
  • Charge current: 80 A
  • Charge outputs: 3 full-rated
  • Charge algorithm: adaptive, 7-stage, Li-ion via BMS on-off or CAN bus
  • Power supply: 185-265 V AC or 180-350 V DC
  • Communication: VE.Can (NMEA 2000), 2 x RJ45, synchronised parallel operation

A modern and powerful battery charger.

  • The right amount of charge for a lead-acid battery: variable absorption time
  • BatterySafe mode: preventing damage due to excessive gassing
  • Storage mode: less maintenance and aging when the battery is not in use
  • Smaller and lighter compared to similar models
  • NMEA 2000 Canbus connection
  • PowerControl: set a maximum shore power
  • Remote Control
  • Li-ion (LiFePo4) ready

Technical specifications

Nominal battery voltage24 V
Nominal charge current80 A
AC input voltage230V
AC input voltage range185 … 265 V
AC input voltage (class)230 V
DC input voltage range180 … 350 VDC
Maximum AC input current (2)16 A
AC input frequency range45 … 65 Hz
Number of charge outputs3
Power factor0.98
Absorption charge voltage28.8 V
Float charge voltage27.6 V
Storage charge voltage26.4 V
Number of full-current outputs3
Charge algorithmAdaptive, 7-stage
Recommended battery capacity400 … 800 Ah
Charge algorithm (lithium)Three stage, with on-off control or CAN-bus control
Temperature sensorIncluded
ProgrammableYes
Can be used as power supplyYes
CAN portVE.Can, two RJ45 connectors, NMEA2000 protocol, not isolated
Parallel operationYes, with VE.Can
Programmable relayDPST AC rating: 240VAC / 4A, DC rating: 4A up to 35VDC, 1A up to 60VDC
Forced coolingYes
ProtectionsOutput short-circuit, Over temperature, Battery reverse polarity (fuse)
Operating temperature range-20 … 60 °C
Maximum humidity95 %
AC connection terminalsscrew-clamp 10 mm² (AWG 7)
Battery connection terminalsM8 bolts
MaterialAluminium
ColourBlue (RAL 5012)
Protection categoryIP21
Weight7 kg
Height405 mm
Width250 mm
Depth150 mm
SafetyEN-IEC 60335-1, EN-IEC 60335-2-29
EmissionEN 55014-1, EN-IEC 61000-3-2, EN-IEC 61000-6-3
ImmunityEN 55014-2, EN-IEC 61000-3-3, EN-IEC 61000-6-1, EN-IEC 61000-6-2
: SKI024080002
Out of Stock

Data sheet

Brand
Victron Energy

16 other products in the same category: