- -15%
€28 Tax excluded
The SmartSolar Pluggable Display is a pluggable LCD display for Victron BlueSolar and SmartSolar MPPT charge controllers of 150 V and 250 V that are equipped with a display port. It plugs into the display port on the front of the controller, has a 9-pin RS232 connector and measures 25 x 116 x 50 mm.
Victron Energy commercial warranty: 5 years for defects in materials and workmanship, handled through us as the seller. In addition to the legal guarantee. Conditions
SmartSolar Pluggable Display is a pluggable LCD display for Victron BlueSolar and SmartSolar MPPT solar charge controllers of 150 V and 250 V that have a display port. It plugs into the display port on the front of the controller.
The display plugs into the display port on the front of a solar charger. To install it, remove the rubber seal that protects the socket on the front of the controller and connect the display.
It is suitable for the Victron Energy BlueSolar and SmartSolar MPPT solar charger range of 150 V and 250 V that are equipped with a display port.
| Installation type | Plugs into the display port on the front of a solar charger. |
|---|---|
| Suitability | Suitable for the Victron Energy BlueSolar and SmartSolar MPPT solar charger range of 150V and 250V, equipped with a display port |
| Display port connector | RS232, 9-pin connector |
| Colour | Black |
| Weight | 66 |
| Height | 25 mm |
| Width | 116 mm |
| Depth | 50 mm |
We took these technical data from the manufacturer’s datasheet; transcription errors are possible. For 100% accuracy, please consult the manufacturer’s datasheet.
Compatibility is calculated automatically from the manufacturers’ technical data and is for information only. For complex systems, we recommend having the configuration checked by a consultant before ordering. Details in the Terms and conditions