€1,063 Tax excluded
EasySolar 24/3000/70 MPPT 150/70 Color Control combines an MPPT solar charge controller, an inverter/charger and AC distribution in a single enclosure. It has a continuous power of 3000 VA (2400 W), a peak power of 5500 W, a maximum PV input voltage of 150 V, a charging current of 70 A and a maximum efficiency of 94 %.
Victron Energy commercial warranty: 5 years for defects in materials and workmanship, handled through us as the seller. In addition to the legal guarantee. Conditions
EasySolar 24/3000/70 MPPT 150/70 Color Control is an all-in-one solar energy solution for 24 V batteries that combines an MPPT solar charge controller, an inverter/charger and AC distribution in a single enclosure. The product is easy to install, with minimal wiring.
The product combines an MPPT solar charge controller, an inverter/charger and AC distribution in a single enclosure and is easy to install, with minimal wiring. The colour control panel gives priority to battery charging by the MPPT controller and connects to the internet, allowing remote monitoring and control through the VRM portal.
The AC distribution consists of an RCD (30 mA / 63 A) and four AC outputs protected by two 10 A and two 16 A circuit breakers. An additional 16 A output is controlled by the AC input and switches on only when AC is available.
PowerAssist technology protects the mains supply or generators from overload by adding extra inverter power when needed. Several software programs (Assistants) are available to configure the system for interactive or stand-alone applications.
| Product code | PMP243027010 |
|---|---|
| Product type | Inverter/charger |
| Inverter type | Hybrid (with integrated MPPT) |
| Phases | Single-phase |
| Power class | 2-3.5 kW |
| Continuous output power (VA, 25 °C) | 3000 VA |
| Continuous output power (W, 25 °C) | 2400 W |
| Peak power | 5500 W |
| Maximum efficiency | 94 % |
| No-load consumption | 13 W |
| Output waveform | Pure sine wave |
| Battery voltage | 24 V |
| DC input voltage range | 19-33 V |
| Maximum charging current | 70 A |
| Maximum panel input voltage | 150 V |
| Number of MPPTs | 1 |
| AC output voltage | 230 V |
| Output frequency | 50 Hz |
| AC input voltage range | 187-265 V |
| Maximum AC input current | 50 A |
| Communication interfaces | VE.Bus, VE.Direct, VE.Can, BMS-Can, Wi-Fi, Ethernet |
| Programmable relay | Yes |
| Protections | Output short circuit, overload, excessive temperature, battery voltage too high, battery voltage too low, excessive DC ripple, AC voltage at output |
| Protection rating (IP) | IP21 |
| Operating temperature | -20 ... 45 °C |
| Maximum relative humidity | 95 % |
| Colour | Blue |
| Material | Aluminium |
| AC distribution | RCD 30 mA / 63 A |
| Protected AC outputs | four, protected by two 10 A and two 16 A circuit breakers |
| Additional output | 16 A, active only when AC is available |
| Control panel | Color Control |
We took these technical data from the manufacturer’s datasheet; transcription errors are possible. For 100% accuracy, please consult the attached datasheet.
Compatibility is calculated automatically from the manufacturers’ technical data and is for information only. For complex systems, we recommend having the configuration checked by a consultant before ordering. Details in the Terms and conditions
