Cookie consent

We use cookies that the shop needs to work and, only with your consent, statistics and marketing cookies.

Learn more
  • -15%
Victron Energy EasySolar-II 48/5000/70-50 MPPT 250/100 GX
  • Victron Energy EasySolar-II 48/5000/70-50 MPPT 250/100 GX
  • Victron Energy EasySolar-II 48/5000/70-50 MPPT 250/100 GX
  • Victron Energy EasySolar-II 48/5000/70-50 MPPT 250/100 GX
  • Victron Energy EasySolar-II 48/5000/70-50 MPPT 250/100 GX
  • Victron Energy EasySolar-II 48/5000/70-50 MPPT 250/100 GX

Victron Energy EasySolar-II 48/5000/70-50 MPPT 250/100 GX

€2,163 Save €325
€1,838 Tax included

€1,532 Tax excluded

EasySolar-II 48/5000/70-50 MPPT 250/100 GX integrates a 5000 VA (4000 W) MultiPlus-II inverter/charger, a SmartSolar MPPT 250/100 solar charge controller and a GX device with display. It has a maximum PV power of 5800 W, a maximum PV open-circuit voltage of 250 V, a solar charger efficiency of 99 % and a charging current of 70 A.

Reference PMP482507010

Victron Energy commercial warranty: 5 years for defects in materials and workmanship, handled through us as the seller. In addition to the legal guarantee. Conditions

Your legal guarantee rights

Legal guarantee

EU harmonised notice on the legal guarantee of conformity

More information: europa.eu/youreurope/guarantees
Open the notice at full size

EasySolar-II 48/5000/70-50 MPPT 250/100 GX - All-in-one solar solution 48 V, 5000 VA

EasySolar-II 48/5000/70-50 MPPT 250/100 GX is an all-in-one solar energy solution for 48 V batteries that integrates a 5000 VA MultiPlus-II inverter/charger, a SmartSolar MPPT 250/100 solar charge controller and a GX device with a 2 x 16 character display. The components are pre-wired in a single unit.

Main features:

  • Continuous power: 5000 VA (4000 W)
  • Maximum PV power: 5800 W
  • Maximum PV voltage: 250 V open-circuit
  • Solar charger efficiency: 99 %
  • Charging current: maximum 70 A
  • Peak power: 9000 W
  • Communication: VE.Direct, VE.Bus, VE.Can, BMS-Can, Wi-Fi, Ethernet

The solution integrates a MultiPlus-II inverter/charger, a SmartSolar MPPT 250/100 solar charge controller and a GX device with a 2 x 16 character display. The elements come pre-wired in a single unit, which simplifies most installations. The DC output of the SmartSolar MPPT is wired in parallel with the DC connection of the MultiPlus-II, and the MultiPlus-II start/stop mechanism also controls the SmartSolar MPPT.

The display reads the parameters of the battery, the inverter and the solar charge controller. The same parameters can be accessed with a smartphone or another Wi-Fi device, and Wi-Fi can also be used to configure the system and change settings.

The integrated GX device includes a BMS-Can interface, which can be used to connect to a compatible battery managed over CAN-bus (this is not a VE.Can-compatible port), a USB port, an Ethernet port and a VE.Direct port.

Technical specifications

Nominal battery voltage48 V
PowerControlYes
PowerAssistYes
Includes MPPTYes
Transfer switch rated current50 A
Maximum AC input current50 A
AC AUX output current50 A
DC input voltage range38 … 66 VDC
AC output voltage230 VAC
AC output frequency50 Hz
Continuous output power at 25 °C (VA)5000 VA
Continuous output power at 25 °C (W)4000 W
Continuous output power at 40 °C3700 W
Continuous power W553000 W
Peak power9000 W
Maximum apparent feed-in power5000 VA
Maximum efficiency96 %
No-load consumption18 W
No-load consumption in AES mode12 W
No-load consumption in search mode2 W
AC input voltage range187 … 265 VAC
AC input frequency range45 … 65 Hz
Absorption charge voltage57.6 VDC
Float charge voltage55.2 VDC
Storage mode charge voltage52.8 VDC
Charging algorithmAdaptive, 4-stage
Maximum battery charging current70 A
Temperature sensorIncluded
Solar charge controller modelMPPT 250/100-Tr
Maximum solar charger output current100 A
Maximum PV power5800 W
Maximum PV open-circuit voltage250 V
Maximum solar charger efficiency99 %
Self-consumption20 mA
Auxiliary outputYes
External AC current sensor50A or 100A (optional)
Programmable relayAC ratings: 230V / 4A, DC ratings: 4A up to 35VDC and 1A up to 60VDC
ProtectionsOutput short circuit, overload, high battery voltage, low battery voltage, over-temperature, AC voltage at the inverter output, excessive DC ripple
Communication portVE.Direct, VE.Bus, VE.Can, BMS-Can, WiFi, Ethernet
Remote on/off terminalOn / Off
Computer programmableYes
Operating temperature range-20 … 45 °C
Fan-assisted coolingYes
Maximum humidity95 %
Maximum altitude2000 m
AC connection terminalsScrew terminals 16 mm² (6 AWG)
Battery connection terminalsM8 screws
PV connection terminalsM6 screws
Remote terminal typeTwo-pole screw terminal
Relay terminalThree-pole screw terminal
VE.Bus terminal typeTwo RJ45 terminals
MaterialAluminium
ColourBlue (RAL 5012)
Protection ratingIP21
Weight38.6 kg
Height604 mm
Width323 mm
Depth253 mm
SafetyEN-IEC 60335-1, EN-IEC 60335-2-29, EN-IEC 62109-1, EN-IEC 62109-2
Emission and immunityEN 55014-1, EN 55014-2, EN-IEC 61000-3-2, EN-IEC 61000-3-3, EN-IEC 61000-6-1, EN-IEC 61000-6-2, EN-IEC 61000-6-3
Anti-islanding standardSee our website

Data sheet

Reference
PMP482507010
Brand
Victron Energy
Product type
Inverter/charger
Inverter type
Hybrid (built-in MPPT)
Phases
Single-phase
Power class
3.5-6 kW
Continuous output power (VA, 25 °C)
5000 VA
Continuous output power (W, 25 °C)
4000 W
Peak power
9000 W
Maximum efficiency
96 %
Zero-load power
18 W
Output waveform
Pure sine wave
Battery voltage
48 V
DC input voltage range
38-66 V
Max. charge current
70 A
Max. PV input voltage
250 V
Number of MPPT trackers
1
AC output voltage
230 V
Output frequency
50 Hz
AC input voltage range
187-265 V
Max. AC input current
50 A
Parallel operation
Yes
Communication interfaces
BMS-Can
Ethernet
USB
VE.Bus
VE.Direct
Wi-Fi
Programmable relay
Yes
Protections
Output short-circuit, overload, overtemperature, high battery voltage, low battery voltage, excessive DC ripple, AC voltage on output
Dimensions (H x W x D)
604 x 323 x 253 mm
Weight
38.6 kg
Ingress protection (IP)
IP21
Operating temperature
-20 ... 45 °C
Max. relative humidity
95 %
Colour
Blue
Material
Aluminium
Standards and compliance
EN-IEC 60335-1, EN 55014-1, EN 55014-2, EN-IEC 61000-3-2

We took these technical data from the manufacturer’s datasheet; transcription errors are possible. For 100% accuracy, please consult the attached datasheet.

Compatibility

Other compatible products

Compatibility is calculated automatically from the manufacturers’ technical data and is for information only. For complex systems, we recommend having the configuration checked by a consultant before ordering. Details in the Terms and conditions

Other products in the same category