Cookie consent

We use cookies that the shop needs to work and, only with your consent, statistics and marketing cookies.

Learn more
  • New
  • -15%
EasyPlus Compact 12/1600/70-16 230V VE.Bus Victron Energy
  • EasyPlus Compact 12/1600/70-16 230V VE.Bus Victron Energy
  • EasyPlus Compact 12/1600/70-16 230V VE.Bus Victron Energy
  • EasyPlus Compact 12/1600/70-16 230V VE.Bus Victron Energy
  • EasyPlus Compact 12/1600/70-16 230V VE.Bus Victron Energy
  • EasyPlus Compact 12/1600/70-16 230V VE.Bus Victron Energy

Inverter/charger Victron Energy EasyPlus Compact 12/1600/70-16 230V VE.Bus

€1,045 Save €157
€888 Tax included

€740 Tax excluded

EasyPlus Compact 12/1600/70-16 230V VE.Bus is a multifunctional energy system that combines, in a single compact enclosure, a 1600 VA sine-wave inverter, a 70 A battery charger, a fast AC transfer switch and AC distribution. It is intended for those who want a complete system without the complexity of installing separate components.

Reference CEP122160000

Victron Energy commercial warranty: 5 years for defects in materials and workmanship, handled through us as the seller. In addition to the legal guarantee. Conditions

Your legal guarantee rights

Legal guarantee

EU harmonised notice on the legal guarantee of conformity

More information: europa.eu/youreurope/guarantees
Open the notice at full size

EasyPlus Compact 12/1600/70-16 230V VE.Bus - Inverter/charger system 12V 1600VA

EasyPlus Compact 12/1600/70-16 230V VE.Bus is a multifunctional energy system that combines, in a single compact enclosure, a 1600 VA sine-wave inverter, a 70 A battery charger, a fast AC transfer switch and AC distribution. It is intended for those who want a complete system without the complexity of installing separate components.

Key features:

  • Battery voltage: 12 V
  • Inverter power: 1600 VA / 1300 W at 25 °C, peak 3000 W
  • Charger: 70 A, adaptive, 4 stages, plus 4 A for the starter battery
  • Transfer switch: 16 A, with PowerAssist
  • AC outputs: 4, with circuit breakers 2 × 10 A and 2 × 16 A
  • Residual current protection: Built-in RCD, 30 mA / 16 A

EasyPlus is a multifunctional energy system that combines, in a lightweight, compact enclosure, an inverter with sine-wave output, a sophisticated battery charger, a fast AC load transfer switch and an AC distribution system. The system is designed for those who want to enjoy the convenience and freedom of a complete energy system, without wasting time on installing components or on difficult technical procedures.

Technical specifications

Nominal battery voltage12 V
PowerControlYes
PowerAssistYes
Parallel operationYes
Three-phase operationYes
Number of AC inputs1
Transfer switch rated current16 A
DC input voltage range9.5 … 17 VDC
AC output voltage230 VAC
AC output frequency50 Hz
Continuous output power at 25 °C (VA)1600 VA
Continuous output power at 25 °C (W)1300 W
Continuous output power at 40 °C1200 W
Continuous output power at 65 °C800 W
Peak power3000 W
Maximum efficiency93 %
No-load consumption8 W
No-load consumption in AES mode5 W
No-load consumption in search mode2 W
AC input voltage range187 … 265 VAC
AC input frequency range45 … 65 Hz
Power factor1
Absorption charge voltage14.4 VDC
Float charge voltage13.8 VDC
Storage mode charge voltage13.2 VDC
Charging algorithmAdaptive, 4 stages
Maximum battery charge current70 A
Starter battery charge outputYes
Starter battery charge current4 A
Temperature sensorIncluded
Number of AC outputs4
Auxiliary outputYes
Programmable relayAC ratings: 230V / 4A, DC ratings: 4A up to 35VDC and 1A up to 60VDC
ProtectionsOutput short circuit, overload, high battery voltage, low battery voltage, over-temperature, AC voltage at the inverter output, excessive DC ripple
Communication portVE.Bus
Remote control terminalOn / Off / Charger only
Programmable via DIP switchesYes
Programmable via computerYes
Operating temperature range-20 … 50 °C
Fan-assisted coolingYes
Maximum humidity95 %
AC connection terminalsConector G-ST18i
Battery connection terminalsRed and black cable, 1.5 metres
Remote terminal typeTwo-pole screw terminal
Relay terminalThree-pole screw terminal
VE.Bus terminal typeTwo RJ45 terminals
MaterialAluminium
ColourBlue (RAL 5012)
Protection ratingIP20
Pollution degree2
OVC III / rated short-time withstand current (Icw)6kA 30mS
Weight11.7 kg
Height510 mm
Width214 mm
Depth110 mm
SafetyEN 60335-1, EN 60335-2-29
Emission and immunityEN 55014-1, EN 55014-2, EN 61000-3-3
Anti-islanding standardSee our website

Data sheet

Reference
CEP122160000
EAN13
8719076063230
Brand
Victron Energy
Product type
Inverter/charger
Inverter type
Inverter/charger
Phases
Single-phase
Power class
1-2 kW
Continuous output power (VA, 25 °C)
1600 VA
Continuous output power (W, 25 °C)
1300 W
Peak power
3000 W
Maximum efficiency
93 %
Zero-load power
8 W
Output waveform
Pure sine wave
Battery voltage
12 V
DC input voltage range
9.5-17 V
Max. charge current
70 A
AC output voltage
230 V
Output frequency
50 Hz
AC input voltage range
187-265 V
Max. AC input current
16 A
Parallel operation
Yes
Communication interfaces
VE.Bus
Programmable relay
Yes
Protections
Output short-circuit, overload, overtemperature, high battery voltage, low battery voltage, excessive DC ripple, AC voltage on output
Dimensions (H x W x D)
510 x 214 x 110 mm
Weight
11.7 kg
Ingress protection (IP)
IP20
Operating temperature
-20 ... 50 °C
Max. relative humidity
95 %
Colour
Blue
Material
Aluminium
Standards and compliance
EN 60335-1, EN 55014-1, EN 55014-2, EN 61000-3-3

We took these technical data from the manufacturer’s datasheet; transcription errors are possible. For 100% accuracy, please consult the attached datasheet.

Compatibility

Other compatible products

Compatibility is calculated automatically from the manufacturers’ technical data and is for information only. For complex systems, we recommend having the configuration checked by a consultant before ordering. Details in the Terms and conditions

Other products in the same category