Cookie consent

We use cookies that the shop needs to work and, only with your consent, statistics and marketing cookies.

Inverter/charger Victron Energy MultiPlus-II 24/5000/120-50, 230 V

€2,017 Save €303
€1,714 Tax included

€1,428 Tax excluded

The MultiPlus-II 24/5000/120-50 230V is an inverter/charger for 24 V batteries, with a continuous power of 5000 VA (4000 W), a peak power of 9000 W, a maximum charging current of 120 A and a maximum efficiency of 96%. The transfer switch is rated at 50 A, parallel operation is possible and communication is via VE.Bus.

Reference PMP242505010

Victron Energy commercial warranty: 5 years for defects in materials and workmanship, handled through us as the seller. In addition to the legal guarantee. Conditions

MultiPlus-II 24/5000/120-50 230V - Inverter/charger 24 V, 5000 VA

MultiPlus-II 24/5000/120-50 230V is a multifunctional inverter/charger for 24 V batteries, with a continuous power of 5000 VA (4000 W), a peak power of 9000 W and a maximum charging current of 120 A. It combines the functions of MultiPlus and MultiGrid, with a 50 A transfer switch.

Key features:

  • Continuous power: 5000 VA (4000 W)
  • Peak power: 9000 W
  • Battery voltage: 24 V
  • Charging current: max. 120 A
  • Maximum efficiency: 96%
  • Transfer switch: 50 A
  • Communication: VE.Bus

MultiPlus-II combines the functions of MultiPlus and MultiGrid and is a multifunctional inverter/charger with two AC outputs. It is suited to professional marine, yacht, vehicle and off-grid stationary systems and provides the isolation and redundancy required for ESS configurations.

PowerControl prevents overloading of the grid or generator, and PowerAssist increases the AC power during consumption peaks. In a power outage, the inverter switches over within milliseconds, keeping computers and sensitive electronic equipment running. The charger combines speed with efficiency through an intelligent adaptive algorithm that extends battery life, and the product supports parallel and three-phase configurations.

Technical specifications

Nominal battery voltage24 V
PowerControlYes
PowerAssistYes
Parallel operationYes
Three-phase operationYes
Number of AC inputs1
Transfer switch rated current50 A
Maximum AC input current50 A
DC input voltage range19 … 33 VDC
AC output voltage230 VAC
AC output frequency50 Hz
Continuous output power at 25 °C (VA)5000 VA
Continuous output power at 25 °C (W)4000 W
Continuous output power at 40 °C3700 W
Continuous output power at 65 °C3000 W
Peak power9000 W
Maximum apparent feed-in power5000 VA
Maximum efficiency96%
No-load consumption18 W
No-load consumption in AES mode12 W
No-load consumption in search mode3 W
AC input voltage range187 … 265 VAC
AC input frequency range45 … 65 Hz
Absorption charging voltage28.8 VDC
Float charging voltage26.6 VDC
Storage mode charging voltage26.4 VDC
Charging algorithmAdaptive, 4-stage
Maximum battery charging current120 A
Temperature sensorIncluded
Number of AC outputs2
Auxiliary outputYes
External AC current sensor50A or 100A (optional)
Programmable relayAC ratings: 230V / 4A, DC ratings: 4A up to 35VDC and 1A up to 60VDC
ProtectionsOutput short circuit, overload, battery voltage too high, battery voltage too low, over-temperature, AC voltage at the inverter output, excessive DC ripple
Communication portVE.Bus
General-purpose communication portYes
Remote control terminalOn / Off / Charger only
Programmable via computerYes
Operating temperature range-40 … 65 °C
Fan-assisted coolingYes
Maximum humidity95%
Maximum altitude2000 m
AC connection terminalsScrew terminals 13 mm² (6 AWG)
Battery connection terminalsM8 screws
Remote terminal type2-pole screw terminal
Relay terminal3-pole screw terminal
VE.Bus terminal typeTwo RJ45 connectors
MaterialSteel
ColourBlue (RAL 5012)
Protection ratingIP22
Weight30 kg
Height607 mm
Width330 mm
Depth149 mm
SafetyEN-IEC 60335-1, EN-IEC 60335-2-29, EN-IEC 62109-1, EN-IEC 62109-2
Emission and immunityEN 55014-1, EN 55014-2, EN-IEC 61000-3-2, EN-IEC 61000-3-3, EN-IEC 61000-6-1, EN-IEC 61000-6-2, EN-IEC 61000-6-3
Anti-islanding standardPlease refer to the certificates on our website
UPS standardPlease refer to the certificates on our website

Data sheet

Reference
PMP242505010
Brand
Victron Energy
Product type
Inverter/charger
Inverter type
Inverter/charger
Phases
Single-phase
Power class
3.5-6 kW
Continuous output power (VA, 25 °C)
5000 VA
Continuous output power (W, 25 °C)
4000 W
Peak power
9000 W
Maximum efficiency
96 %
Zero-load power
18 W
Output waveform
Pure sine wave
Battery voltage
24 V
DC input voltage range
19-33 V
Max. charge current
120 A
AC output voltage
230 V
Output frequency
50 Hz
AC input voltage range
187-265 V
Max. AC input current
50 A
Parallel operation
Yes
Communication interfaces
VE.Bus
Programmable relay
Yes
Protections
Output short-circuit, overload, overtemperature, high battery voltage, low battery voltage, excessive DC ripple, AC voltage on output
Dimensions (H x W x D)
607 x 330 x 149 mm
Weight
30 kg
Ingress protection (IP)
IP22
Operating temperature
-40 ... 65 °C
Max. relative humidity
95 %
Colour
Blue
Material
Steel
Standards and compliance
EN-IEC 60335-1, EN 55014-1, EN 55014-2, EN-IEC 61000-3-2

We took these technical data from the manufacturer’s datasheet; transcription errors are possible. For 100% accuracy, please consult the attached datasheet.

Compatibility

Other compatible products

Compatibility is calculated automatically from the manufacturers’ technical data and is for information only. For complex systems, we recommend having the configuration checked by a consultant before ordering. Details in the Terms and conditions

Other products in the same category