- -15%
€427 Tax excluded
Lead Carbon 12V/160Ah (M8) is a battery in which the active material of the negative plate is replaced by a lead carbon composite. This reduces sulfation, allows a lower charge voltage with higher efficiency and less corrosion, and improves cycle life. It suits off-grid solar systems and boats where the battery often operates at partial state of charge.
Lead Carbon 12V/160Ah (M8) is a battery in which the active material of the negative plate is replaced by a lead carbon composite. This reduces sulfation, allows a lower charge voltage with higher efficiency and less corrosion, and improves cycle life. It suits off-grid solar systems and boats where the battery often operates at partial state of charge.
Replacing the active material of the negative plate by a lead carbon composite potentially reduces sulfation and improves charge acceptance of the negative plate.
The advantages of lead carbon therefore are:
| Nominal battery voltage | 12 V |
|---|---|
| Nominal battery voltage (class) | 12 |
| Nominal battery capacity | 160 Ah |
| Capacity (C20) | 160 Ah |
| Capacity (C10) | 150 Ah |
| Capacity (C5) | 138 Ah |
| Chemistry | Lead-acid |
| Technology | Lead carbon |
| Seal type | Sealed VLRA (Valve Regulated Lead Acid) |
| Cold cranking amps (CCA) | 600 A |
| Reserve capacity | 290 Ah |
| Cycle design life at 100 % DoD | 500 cycles |
| Cycle design life at 60 % DoD | 1000 cycles |
| Cycle design life at 40 % DoD | 1400 cycles |
| Recommended absorption charge voltage | 14.1 … 14.6 V |
| Recommended float charge voltage | 13.5 … 13.8 V |
| Recommended storage charge voltage | 13.2 … 13.5 V |
| Battery terminals | M8 threaded inserts |
| Weight | 55 kg |
| Length | 532 mm |
| Width | 207 mm |
| Height | 226 mm |
We took these technical data from the manufacturer’s datasheet; transcription errors are possible. For 100% accuracy, please consult the attached datasheet.
Compatibility is calculated automatically from the manufacturers’ technical data and is for information only. For complex systems, we recommend having the configuration checked by a consultant before ordering. Details in the Terms and conditions