- -15%
€499 Tax excluded
The Phoenix Inverter 12/1600 Smart is a single-phase pure sine wave inverter of 1600 VA (1300 W), with 3000 W peak power, at 12 V. It has Bluetooth and VE.Direct, an all-metal case and a toroidal transformer for high peak capacity and stable voltage. Maximum efficiency 92 %.
Victron Energy commercial warranty: 5 years for defects in materials and workmanship, handled through us as the seller. In addition to the legal guarantee. Conditions
Phoenix Inverter 12/1600 Smart is a single-phase pure sine wave inverter, without a charger, with a continuous power of 1600 VA (1300 W) at 12 V. It has built-in Bluetooth and an all-metal case, and is powerful enough for common electrical appliances in a car, boat, caravan or home.
The Phoenix Inverter Smart is built on the Phoenix inverter platform, with a slimmer design and an all-metal case. It is powerful enough for the most common electrical appliances in a car, boat, caravan or home. A toroidal transformer provides high peak capacity, stable voltage and frequency, and a high-quality sine wave.
The terminals are more accessible for the installer, which allows a more professional finish. The built-in Bluetooth simplifies configuration: alarms, the alarm relay, voltage cut-off, output voltage, frequency, ECO mode and other parameters are set from VictronConnect.
| Product code | CIN121620000 |
|---|---|
| Product type | Inverter |
| Inverter type | Inverter (without charger) |
| Phases | Single-phase |
| Power class | 1-2 kW |
| Continuous output power (VA, 25 °C) | 1600 VA |
| Continuous output power (W, 25 °C) | 1300 W |
| Peak power | 3000 W |
| Maximum efficiency | 92 % |
| No-load consumption | 8 W |
| Output waveform | Pure sine wave |
| Battery voltage | 12 V |
| DC input voltage range | 9.3-17 V |
| AC output voltage | 230 V |
| Output frequency | 50/60 Hz |
| Parallel operation | No |
| Communication interfaces | VE.Direct, Bluetooth |
| Programmable relay | Yes |
| Protections | Output short circuit, overload, excessive temperature, battery voltage too high, battery voltage too low, excessive DC ripple, AC voltage at output |
| Dimensions (height x width x depth) | 485 x 219 x 125 mm |
| Weight | 12 kg |
| Protection rating (IP) | IP21 |
| Operating temperature | -40 ... 65 °C |
| Maximum relative humidity | 95 % |
| Color | Blue and black |
| Material | Steel |
| Standards and compliance | EN 60335-1, ECE R10-5, EN 55014-1, EN 55014-2 |
We took these technical data from the manufacturer’s datasheet; transcription errors are possible. For 100% accuracy, please consult the attached datasheet.
Compatibility is calculated automatically from the manufacturers’ technical data and is for information only. For complex systems, we recommend having the configuration checked by a consultant before ordering. Details in the Terms and conditions