€549 Tax excluded
The Victron Phoenix Inverter 48/3000 is a SinusMax pure sine wave inverter for 48 V batteries, with 3000 VA (2400 W) continuous power at 25 °C, 6000 W peak power and 95 % maximum efficiency. It has a VE.Bus port, a programmable relay and can run in parallel or three-phase.
Victron Energy commercial warranty: 5 years for defects in materials and workmanship, handled through us as the seller. In addition to the legal guarantee. Conditions
Victron Phoenix Inverter 48/3000 is a pure sine wave inverter with SinusMax technology, with 3000 VA (2400 W) continuous power at 25 °C, for 48 V batteries and with an aluminium enclosure. It has a VE.Bus port and can run in parallel or in a three-phase configuration.
The Phoenix range is designed for professional loads and produces a true sine wave with optimised efficiency. Hybrid HF technology results in a compact, lightweight product able to power any load. A feature of SinusMax technology is its very high starting power, suitable for demanding loads such as refrigeration compressors and electric motors. Up to 6 units can be operated in parallel for more power; for example, six 24/5000 units deliver an output power of 24 kW / 30 kVA. Three-phase operation is also possible.
The inverter has a VE.Bus port; connecting it to a computer requires the MK3-USB interface (VE.Bus to USB), and the parameters are customised with VictronConnect or VEConfigure: output voltage and frequency, overvoltage and undervoltage settings and relay programming. The relay can signal alarm conditions or start a generator. The inverter can be connected to a GX device (for example Cerbo GX) for monitoring and control. If an automatic transfer switch is required, we recommend the MultiPlus, which includes one and has a switching time of under 20 milliseconds.
| Nominal battery voltage | 48 V |
|---|---|
| DC input voltage range | 38 … 66 V |
| AC output voltage | 230 V |
| Frequency selection | 50Hz |
| Continuous output power at 25 °C (VA) | 3000 VA |
| Continuous output power at 25 °C (W) | 2400 W |
| Continuous output power at 40 °C | 2200 W |
| Continuous output power at 65 °C | 1700 W |
| Peak power | 6000 W |
| Maximum efficiency | 95 % |
| No-load power consumption | 25 W |
| No-load power consumption in AES mode | 20 W |
| No-load power consumption in search mode | 12 W |
| Programmable relay | AC rating: 230V / 4A, DC rating: 4A up to 35VDC and 1A up to 60VDC |
| Remote on/off terminal | Yes |
| Communication port | VE.Bus |
| Fully programmable | Yes |
| Parallel and three-phase operation | Yes |
| Protections | Output short circuit, Overload, High battery voltage, Low battery voltage, Over-temperature, AC voltage at the inverter output, Excessive DC ripple |
| Operating temperature range | -40 … 65 °C |
| Cooling | Yes |
| Maximum humidity | 95 % |
| Battery connection | M8 screws (two for the positive connection and two for the negative) |
| AC connection | Screw terminals |
| Remote control terminal | Two-pole screw terminal |
| Relay terminal | Three-pole screw terminal |
| Colour | Blue (RAL 5012) |
| Material | Aluminium |
| Protection rating | IP21 |
| Weight | 18 kg |
| Height | 364 mm |
| Width | 295 mm |
| Depth | 221 mm |
| Safety | EN-IEC 60335-1 |
| EMC | EN 55014-1, EN 55014-2 |
We took these technical data from the manufacturer’s datasheet; transcription errors are possible. For 100% accuracy, please consult the attached datasheet.
Compatibility is calculated automatically from the manufacturers’ technical data and is for information only. For complex systems, we recommend having the configuration checked by a consultant before ordering. Details in the Terms and conditions
