Cookie consent

We use cookies that the shop needs to work and, only with your consent, statistics and marketing cookies.

Learn more
  • -15%
Inverter/charger Victron Energy Quattro-II 24/5000/120-50/50, 230 V

Inverter/charger Victron Energy Quattro-II 24/5000/120-50/50, 230 V

€2,076 Save €312
€1,764 Tax included

€1,470 Tax excluded

The Quattro-II 24/5000/120-50/50 is an inverter/charger with two AC inputs for 24 V batteries, with 5000 VA (4000 W) continuous power at 25 °C, 9000 W peak power and a maximum charge current of 120 A. It features PowerControl, PowerAssist, parallel and three-phase operation, and VE.Bus communication.

Reference QUA242505010

Victron Energy commercial warranty: 5 years for defects in materials and workmanship, handled through us as the seller. In addition to the legal guarantee. Conditions

Your legal guarantee rights

Legal guarantee

EU harmonised notice on the legal guarantee of conformity

More information: europa.eu/youreurope/guarantees
Open the notice at full size

Quattro-II 24/5000/120-50/50 - Inverter/charger with two AC inputs, 24 V, 5 kVA

Quattro-II 24/5000/120-50/50 is an inverter/charger with two AC inputs for 24 V batteries, combining a 5 kVA pure sine wave inverter and an adaptive charger with a maximum charge current of 120 A. It can be connected to two independent AC sources and switches automatically to the active one. It features PowerAssist hybrid technology and a UPS function, and communicates via VE.Bus.

Key features:

  • Battery voltage: 24 V
  • Continuous power: 5000 VA / 4000 W at 25 °C
  • Peak power: 9000 W
  • Charge current: 120 A
  • AC inputs: 2, 187-265 V, pass-through current 2x 50A
  • Maximum efficiency: 96 %
  • Communication: VE.Bus

The Quattro-II can be connected to two independent AC sources, for example the grid and one or two generators, and connects automatically to the active source. The main output works without interruption: if the grid fails or the source is disconnected, the Quattro-II takes over supplying the connected loads in less than 20 milliseconds, so computers and other electronic equipment keep running.

The second output is live only when AC is present on one of the inputs; loads that should not drain the battery, such as air conditioning or water heaters, can be connected to it. The PowerAssist function prevents overloading of a limited AC source, and up to 6 Quattro-II units can operate in parallel; three-phase or split-phase operation is also possible.

Paired with a GX device (for example the Cerbo GX), the system can be monitored and controlled locally (LAN) or remotely over the internet, with the free VRM app and the VRM portal, from a phone, tablet, laptop or PC. The level of control is extensive, from adjusting the unit to automatically starting a backup generator.

Technical specifications

Nominal battery voltage24 V
PowerControlYes
PowerAssistYes
Parallel operationYes
Three-phase operationYes
Integrated transfer switchYes
Number of AC inputs2
AC input voltage range187 … 265 V
AC input voltage range (2)187 … 265 V
AC input frequency range45 … 65 Hz
Maximum pass-through current2x 50A
DC input voltage range19 … 33 VDC
AC output voltage230 VAC
AC output frequency50 Hz
Continuous output power at 25 °C (VA)5000 VA
Continuous output power at 25 °C (W)4000 W
Continuous output power at 40 °C3700
Continuous output power at 65 °C3000 W
Peak power9000 W
Maximum injected apparent power5000 VA
Maximum efficiency96 %
No-load consumption18 W
No-load consumption in AES mode12 W
No-load consumption in search mode2 W
Charge voltage in absorption28.8 VDC
Float charge voltage27.6 VDC
Charge voltage in storage mode26.4 VDC
Charging algorithmAdaptive, 4-stage
Maximum battery charge current120 A
Temperature sensorIncluded
Auxiliary outputYes
Programmable relayAC rating: 230V / 4A, DC rating: 4A up to 35VDC and 1A up to 60VDC
ProtectionsOutput short circuit, Overload, High battery voltage, Low battery voltage, Over-temperature, AC voltage on the inverter output, Excessive DC ripple
Communication portVE.Bus
General-purpose communication portYes
Remote control terminalOn / Off
Operating temperature range-40 … 65 °C
Fan-assisted coolingYes
Maximum humidity95 %
Maximum altitude2000 m
AC connection terminalsScrew terminals 13 mm² (6 AWG)
Battery connection terminalsM8 bolts (two for the positive connection and two for the negative)
Remote terminal typeTwo-pole screw terminal
Relay terminalThree-pole screw terminal
VE.Bus terminal typeTwo RJ45 terminals
MaterialSteel
ColourBlue (RAL 5012)
Protection ratingIP21
Weight31 kg
Height607 mm
Width329 mm
Depth149 mm
SafetyEN-IEC 60335-1, EN-IEC 60335-2-29, EN-IEC 62109-1
Emission and immunityEN 55014-1, EN 55014-2, EN-IEC 61000-3-2, EN-IEC 61000-3-3, EN-IEC 61000-6-1, EN-IEC 61000-6-2, EN-IEC 61000-6-3
Anti-islanding standardPlease see the certificates on our website
UPS standardPlease see the certificates on our website

Data sheet

Reference
QUA242505010
Brand
Victron Energy
Product type
Inverter/charger
Inverter type
Inverter/charger
Off-grid (no grid)
Phases
Single-phase
Power class
3.5-6 kW
Continuous output power (VA, 25 °C)
5000 VA
Continuous output power (W, 25 °C)
4000 W
Peak power
9000 W
Maximum efficiency
96 %
Zero-load power
18 W
Output waveform
Pure sine wave
Battery voltage
24 V
DC input voltage range
19-33 V
Max. charge current
120 A
AC output voltage
230 V
Output frequency
50 Hz
AC input voltage range
187-265 V
Max. AC input current
50 A
Parallel operation
Yes
Communication interfaces
VE.Bus
Programmable relay
Yes
Protections
Output short-circuit, overload, overtemperature, high battery voltage, low battery voltage, excessive DC ripple, AC voltage on output
Dimensions (H x W x D)
607 x 329 x 149 mm
Weight
31 kg
Ingress protection (IP)
IP21
Operating temperature
-40 ... 65 °C
Max. relative humidity
95 %
Colour
Blue
Material
Steel
Standards and compliance
EN-IEC 60335-1, EN 55014-1, EN 55014-2, EN-IEC 61000-3-2

We took these technical data from the manufacturer’s datasheet; transcription errors are possible. For 100% accuracy, please consult the attached datasheet.

Compatibility

Other compatible products

Compatibility is calculated automatically from the manufacturers’ technical data and is for information only. For complex systems, we recommend having the configuration checked by a consultant before ordering. Details in the Terms and conditions

Other products in the same category