Cookie consent

We use cookies that the shop needs to work and, only with your consent, statistics and marketing cookies.

Inverter Victron Energy Phoenix 48V 3000W Smart

€765 Save €115
€650 Tax included

€542 Tax excluded

The Victron Phoenix Inverter 48/3000 Smart is a sine wave inverter for 48 V batteries, with 3000 VA (2400 W) continuous power at 25 °C, 6000 W peak power and 95 % maximum efficiency. It has built-in Bluetooth, a VE.Direct port, a programmable relay and a fully metal enclosure.

Reference PIN482300000

Victron Energy commercial warranty: 5 years for defects in materials and workmanship, handled through us as the seller. In addition to the legal guarantee. Conditions

Victron Phoenix Inverter 48/3000 Smart - 3000 VA sine wave inverter, Bluetooth, 48 V battery

Victron Phoenix Inverter 48/3000 Smart is a sine wave inverter with a fully metal enclosure, with 3000 VA (2400 W) continuous power at 25 °C, for 48 V batteries, with built-in Bluetooth and a VE.Direct port. It is configured with VictronConnect.

Key features:

  • Continuous output power: 3000 VA / 2400 W at 25 °C
  • Peak power: 6000 W
  • Battery voltage: 48 V
  • DC input range: 37.2-68 V
  • Maximum efficiency: 95 %
  • Communication: VE.Direct, Bluetooth
  • Protection rating: IP21

The Phoenix Inverter Smart is built on the Phoenix inverter platform, with proven, field-tested reliability, and has a fully metal enclosure. The full-bridge topology with a toroidal transformer has proven its reliability over the years; the inverter is short-circuit proof and protected against overheating caused by overload or high ambient temperature. The models are available in 1600 VA, 2000 VA, 3000 VA and 5000 VA versions for 12, 24 or 48 V systems.

The built-in Bluetooth allows full configuration with a smartphone or tablet through VictronConnect: low battery voltage alarm, cut-off and restart levels, dynamic cut-off (load-dependent cut-off level), output voltage 210-245 V, frequency 50 Hz or 60 Hz, ECO mode activation and the alarm relay. The VE.Direct port can be connected to a computer (a VE.Direct to USB interface cable is required) for configuration and monitoring.

The high starting power allows it to supply power converters for LED lamps, halogen lamps or power tools. In ECO mode, the inverter switches to standby when the load falls below a preset value and switches on for a short period every 2.5 seconds (adjustable). A remote on/off switch or a relay contact can be connected to the two-pin connector. To transfer the load to another AC source, we recommend the Filax automatic transfer switch (switching time under 20 milliseconds) or a MultiPlus with a built-in transfer switch.

Technical specifications

Nominal battery voltage48 V
DC input voltage range37.2 … 68 V
AC output voltage230 V
Frequency50Hz or 60Hz
Continuous output power at 25 °C (VA)3000 VA
Continuous output power at 25 °C (W)2400 W
Continuous output power at 40 °C2200 W
Continuous output power at 65 °C1700 W
Peak power6000 W
Dynamic cut-off at low DC voltageYes
Maximum efficiency95 %
No-load power consumption15 W
No-load power consumption in ECO mode2.8 W
Power shut-down/wake-up setting in ECO modeAdjustable
Parallel and three-phase operationNo
Remote on/off terminalYes
Programmable relayAC rating: 230V / 4A, DC rating: 4A up to 35VDC and 1A up to 60VDC
BluetoothYes
Communication portBluetooth, VE.Direct
Fully programmableYes
ProtectionsOutput short circuit, Overload, High battery voltage, Low battery voltage, Over-temperature, AC voltage at the inverter output, Excessive DC ripple
Operating temperature range-40 … 65 °C
Maximum humidity95 %
AC connectionScrew terminals
Battery connectionM8 screws
Remote control terminalTwo-pole screw terminal
Relay terminalThree-pole screw terminal
ColourBlue (RAL 5012) and black (RAL 9017)
MaterialSteel
Protection ratingIP21
Weight19 kg
Height485 mm
Width285 mm
Depth150 mm
SafetyEN-IEC 60335-1
Emission and immunityEN 55014-1, EN 55014-2, EN-IEC 61000-6-1, EN-IEC 61000-6-2, EN-IEC 61000-6-3
Automotive directiveECE R10-5

Data sheet

Reference
PIN482300000
Brand
Victron Energy
Product type
Inverter
Inverter type
Inverter (no charger)
Phases
Single-phase
Power class
2-3.5 kW
Continuous output power (VA, 25 °C)
3000 VA
Continuous output power (W, 25 °C)
2400 W
Peak power
6000 W
Maximum efficiency
95 %
Zero-load power
15 W
Output waveform
Pure sine wave
Battery voltage
48 V
DC input voltage range
37.2-68 V
AC output voltage
230 V
Output frequency
50/60 Hz
Parallel operation
No
Communication interfaces
Bluetooth
VE.Direct
Programmable relay
Yes
Protections
Output short-circuit, overload, overtemperature, high battery voltage, low battery voltage, excessive DC ripple, AC voltage on output
Dimensions (H x W x D)
485 x 285 x 150 mm
Weight
19 kg
Ingress protection (IP)
IP21
Operating temperature
-40 ... 65 °C
Max. relative humidity
95 %
Colour
Blue and black
Material
Steel
Standards and compliance
EN-IEC 60335-1, ECE R10-5, EN 55014-1, EN 55014-2

We took these technical data from the manufacturer’s datasheet; transcription errors are possible. For 100% accuracy, please consult the attached datasheet.

Download

Compatibility

Other compatible products

Compatibility is calculated automatically from the manufacturers’ technical data and is for information only. For complex systems, we recommend having the configuration checked by a consultant before ordering. Details in the Terms and conditions

Other products in the same category