€1,623 Tax excluded
Fronius Primo GEN24 3.0 Plus is a single-phase hybrid inverter with a rated power of 3 kW (4.5 kW peak), 2 MPPTs, a maximum input voltage of 600 V and a maximum efficiency of 97.4 %. It has IP66 protection rating and communicates via Wi-Fi, Ethernet, RS485 and Modbus.
Fronius Primo GEN24 3.0 Plus is a 3 kW single-phase hybrid inverter with 2 MPPTs and IP66 protection rating. It is part of the GEN24 Plus series, which enables energy independence for electricity, heating, cooling and e-mobility with the help of a battery system.
The Fronius GEN24 Plus hybrid inverter enables energy independence for electricity, heating, cooling and e-mobility with the help of a battery system. It has a pure sine wave output, a single set of DC inputs and operates over a wide temperature range, from -40 to 60 °C, at relative humidity of up to 100 %.
| Power category | 3-5 kW |
|---|---|
| Rated output power | 3000 W / 3000 VA |
| Maximum power | 4.5 kW peak |
| Phase | Single-phase |
| AC output voltage | 220/230 V |
| Output frequency | 50/60 Hz |
| Maximum output current | 20.0 A |
| Waveform | Pure sine wave |
| Total harmonic distortion | < 3.5 % |
| Maximum efficiency | 97.4 % |
| Inverter type | Hybrid (with integrated MPPT) |
| Battery voltage | HV (high voltage) |
| Number of MPPTs | 2 |
| MPPT voltage range | 65-530 V |
| DC input voltage range | 65-600 V |
| Nominal input voltage | 150-455 V |
| Maximum input voltage | 600 V |
| Maximum input current | 22.0 A (MPPT 1) / 12.0 A (MPPT 2) |
| Number of DC inputs | 1 |
| Protections | Reverse polarity on the panels |
| Communication interfaces | Wi-Fi, Ethernet, RS485, Modbus |
| Protection rating | IP66 |
| Operating temperature | -40 ... 60 °C |
| Maximum relative humidity | 100 % |
| Dimensions | 52.8 x 47.4 x 16.4 cm |
| Weight | 16.6 kg |
| Standards | IEC 62109, IEC 62909, IEC 62116 |
We took these technical data from the manufacturer’s datasheet; transcription errors are possible. For 100% accuracy, please consult the attached datasheet.
Compatibility is calculated automatically from the manufacturers’ technical data and is for information only. For complex systems, we recommend having the configuration checked by a consultant before ordering. Details in the Terms and conditions
