New products

Smart IP43 12/30(1+1) 120-240V is an adaptive charger for 12V batteries with one main output and a low-current starter battery output, intended for marine, eMobility, leisure, off-grid and industrial applications. Built-in Bluetooth allows monitoring, configuration and alarm setup in VictronConnect, while VE.Direct connects it to a GX device for remote monitoring via VRM.

Multi RS 48/6000/100-50 230V is a lightweight, high-frequency 48V, 6 kVA inverter/charger for stationary and mobile applications, the non-solar variant of the Multi RS Solar. It supports Dynamic ESS, can be paired with another solar inverter, and all parameters can be monitored on the built-in display or in the VictronConnect app.

Multi HS19 Solar 15k is an inverter/charger for high-voltage batteries of 650-1000 V, with a built-in MPPT solar charger and 400 V AC output. It offers 15,000 VA continuous power, a maximum efficiency of 98% and communication via VE.Can, BMS-Can, VE.Direct and Bluetooth, and is intended for high-power storage systems. It suits off-grid, peak-shaving, backup or feed-in applications.

MultiPlus-II 48/5000/70-50 230V is a multifunctional inverter/charger with two AC outputs, suitable for marine, vehicle and off-grid systems as well as ESS installations. PowerControl prevents grid or generator overload, PowerAssist boosts power during peak demand, and during an outage it switches over in milliseconds. It charges 48V batteries at up to 70 A.

Multi RS19 Solar 48/6000/100-450/100 is a lightweight, high-frequency 48V, 6 kVA inverter/charger with two independent 65-450 V MPPT trackers for 6 kWp of total PV capacity. The 19-inch variant fits into a standard battery rack and suits both grid-connected systems, including Dynamic ESS, and off-grid applications.

EasySolar-II 48/6k5/100-50 MPPT 250/100 GX is a system that combines an MPPT solar charge controller, an inverter/charger for 48V batteries and a GX control hub in one enclosure. It is easy to install with minimal wiring and is intended for self-consumption and home storage, with 6000 W continuous power and up to 5800 W of PV power.

EasySolar-II 48/4k5/55-32 MPPT 250/70 GX is a system that combines an MPPT solar charge controller, an inverter/charger for 48V batteries and a GX control hub in one enclosure. It is easy to install with minimal wiring and is intended for self-consumption and home storage, with 4000 W continuous power and up to 4000 W of PV power.

MultiPlus-II 12/4k/160-32 230V is a multifunctional inverter/charger with two AC outputs, suitable for marine, vehicle and off-grid systems as well as ESS installations. PowerControl prevents grid or generator overload, PowerAssist boosts power during peak demand, and during an outage it switches over in milliseconds. It charges 12V batteries at up to 160 A.

MultiPlus 48/2000/25-32 230V VE.Bus is an inverter/charger that combines a true sine wave inverter and an adaptive charger for 48V batteries in one enclosure. It delivers 1600 W continuous power, charges batteries at up to 25 A, and its PowerAssist technology supplements grid or generator power; units can operate in parallel or three-phase.

MultiPlus 24/2000/50-32 230V VE.Bus is an inverter/charger that combines a true sine wave inverter and an adaptive charger for 24V batteries in one enclosure. It delivers 1600 W continuous power, charges batteries at up to 50 A, and its PowerAssist technology supplements grid or generator power; units can operate in parallel or three-phase.

MultiPlus-II 24/3000/70-32 230V GX is an inverter/charger with a built-in GX device that communicates with solar chargers, batteries and other devices to control grid-connected, off-grid or remote power installations. It can operate in parallel or three-phase, and features such as uninterrupted power supply and load limits are controlled from a phone, with remote monitoring available.

Inverter RS 48/6000 230V Smart is a 48V, 6 kVA inverter with high-frequency technology, weighing only 11 kg, with high efficiency, low standby power and very quiet operation. Battery and inverter data can be read on the built-in display or via Bluetooth in VictronConnect, and the VE.Can port allows connection to a GX device.

MultiPlus-II 12/5000/220-50 230V is a multifunctional inverter/charger with two AC outputs, suitable for marine, vehicle and off-grid systems as well as ESS installations. PowerControl prevents grid or generator overload, PowerAssist boosts power during peak demand, and during an outage it switches over in milliseconds. It charges 12V batteries at up to 220 A.

MultiPlus 12/3000/120-16 230V VE.Bus is an inverter/charger that combines a true sine wave inverter and an adaptive charger for 12V batteries in one enclosure. It delivers 2400 W continuous power, charges batteries at up to 120 A, and its PowerAssist technology supplements grid or generator power; units can operate in parallel or three-phase.

Phoenix 48/1200 230V VE.Direct IEC is an inverter that converts the voltage of a 48V battery into 230V AC, powering domestic equipment from leisure or automotive batteries. It delivers 1000 W continuous and 2200 W peak power, has a VE.Direct port for configuration and monitoring, and loads connect to its IEC-320 outlet. It is short-circuit proof and protected against overheating.

Phoenix 48/5000 230V Smart is a Smart inverter for 48V batteries, with a full metal casing and a toroidal transformer that provides stable voltage and frequency and a high-quality sine wave. With 4000 W continuous and 10,000 W peak power, it supplies common appliances in cars, boats, caravans or homes and is configured via Bluetooth in VictronConnect.

Phoenix 48/800 230V VE.Direct Schuko is an inverter for 48V battery systems that supplies 230V AC for domestic equipment powered from leisure or automotive batteries. It is rated at 800 VA, has a VE.Direct port for configuration and monitoring, and loads connect directly to its Schuko outlet. It is short-circuit proof and protected against overheating.

Phoenix 48/1200 230V VE.Direct Schuko is a 1200 VA inverter (1000 W continuous at 25 °C) that powers 230V AC domestic equipment from 48V leisure or automotive batteries. The VE.Direct port allows full configuration and monitoring, while ECO mode reduces no-load consumption to 3 W. The output socket is of Schuko type.

Phoenix 48/800 230V VE.Direct IEC is a 800 VA inverter (650 W continuous at 25 °C) that powers 230V AC domestic equipment from 48V leisure or automotive batteries. The VE.Direct port allows full configuration and monitoring, while ECO mode reduces no-load consumption to 3 W. The output socket is of IEC-320 type.

Phoenix 48/500 230V VE.Direct IEC is an inverter that converts the voltage of a 48V battery into 230V AC, powering domestic equipment from leisure or automotive batteries. It delivers 400 W continuous and 900 W peak power, has a VE.Direct port for configuration and monitoring, and loads connect to its IEC-320 outlet. It is short-circuit proof and protected against overheating.