- Nuovo
1.066 € Tasse escluse
Pylontech Fidus FB-L-5.12-EU-Pro is a 51.2 V LiFePO4 battery with a nominal energy of 5.12 kWh (4.86 kWh usable, 95 % depth of discharge) and automatic cell heating for low temperatures. Continuous current of 100 A, CAN and RS485 communication, ingress protection IP65, weight 45 kg.
Pylontech Fidus FB-L-5.12-EU-Pro is a low-voltage LiFePO4 battery (51.2 V, 5.12 kWh) with automatic cell heating, for residential energy storage. It can be mounted on a wall, on the floor or in a rack, communicates over CAN or RS485 and has ingress protection IP65.
The maximum continuous charge and discharge current is 100 A, and the peak current is 103-120 A for 2 minutes and 121-200 A for 15 seconds. One group can have up to 20 batteries (19 in multi-group setups) and the system up to 6 groups. For paralleling several groups, the datasheet requires an LV-HUB. The manufacturer states scalability from 5 kWh to 583 kWh (1-114 modules).
The self-heating version (Pro) works between -20 and 55 °C. Heating activates between -20 and -10 °C, and charging and discharging are allowed only above -10 °C; the BMS limits the current at extreme temperatures. The enclosure has ingress protection IP65 and corrosion resistance class C5-M, and the design life is 15 years, with 8000 cycles at 25 °C, 0.5C and 5-95 % SOC. The interfaces include LEDs, Bluetooth and Wi-Fi (optional).
The official Pylontech list of compatible inverters (version 2.46, updated 7 July 2026) has one shared column for familia Fidus (FB-L-5.12), which lists Victron Energy inverters (Multiplus and Quattro 48 V, via Venus OS, CAN communication), Solis (S6-EH1P-L, S6-EH1P-L-PLUS, S6-EH3P-NV-YD-L) and Deye (SUN-SG01LP1, SUN-SG03LP1, SUN-SG04LP1, SUN-SG04LP3 and SUN-SG05LP3 series), among other manufacturers. Firmware V1586 is stated for the Deye SG01LP1 and SG03LP1 series, and firmware 422 with Venus OS V2.15 or newer for Victron. In off-grid use with Victron, a Victron MPPT or another Victron-compatible PV inverter is required.
| Product type | Battery |
|---|---|
| Battery chemistry | LiFePO4 (lithium iron phosphate) |
| Battery voltage class | 48 V |
| Nominal voltage | 51.2 V |
| Rated capacity | 100 Ah |
| Nominal energy | 5.12 kWh |
| Usable energy | 4.86 kWh |
| Capacity class | 2.5-6 kWh |
| Discharge voltage range | 42.5-56.8 V |
| Charge voltage range | 56-56.8 V |
| Max. continuous charge / discharge current | 100 A / 100 A |
| Peak charge / discharge current | 103-120 A (2 min), 121-200 A (15 s) |
| Depth of discharge | 95 % |
| Cycle life | 8000 cycles (25 °C, 0.5C, SOC 5-95 %) |
| Design life | 15 years |
| Parallel connection | up to 20 units per group (19 with several groups), up to 6 groups |
| Communication interfaces | CAN, RS485 |
| Built-in BMS | Yes |
| Heating function | automatic (activates between -20 and -10 °C) |
| Display and connectivity | LED, Bluetooth, Wi-Fi (optional) |
| Ingress protection (IP) | IP65 |
| Corrosion resistance class | C5-M |
| Protection class | I |
| Operating temperature | -20 ... 55 °C (charging and discharging only above -10 °C) |
| Storage temperature | -20 ... 60 °C |
| Relative humidity | 5-95 % (non-condensing) |
| Max. operating altitude | 4000 m |
| Short-circuit current | < 1000 A / 1 ms |
| Cooling | natural |
| Installation | wall, floor or rack |
| Standards and compliance | IEC 62619, IEC 63056, VDE 2510-50, IEC 62477-1, UN 38.3, RoHS, REACH, WEEE, EMC/CE |
| Dimensions (height x width x depth) | 363 x 630 x 170 mm |
| Weight | 45 kg |
Questi dati tecnici sono stati ripresi da noi dalla scheda tecnica del produttore e possono contenere errori di trascrizione. Per un’accuratezza del 100 %, consulti la scheda tecnica allegata.
Le compatibilità sono calcolate automaticamente dai dati tecnici dei produttori e hanno carattere informativo. Per impianti complessi consigliamo di far verificare la configurazione da un consulente prima dell’ordine. Dettagli nei Termini e condizioni