New products

Shore Power Cord 15m 16A/250Vac (3x2,5mm²) is a 15 m shore power cable for connecting a boat or vehicle to the grid. It has a moulded IEC 60309 plug and connector, IP56 protection and a power indication LED.

Power Inlet Stainless Steel with Cover 32A/250Vac (2p/3w) is a shore power inlet for connecting boats and vehicles to the grid via the shore power cord. It has an IEC 60309 connector, a 316 stainless steel cover and IP56 protection.

Plug 16A/250Vac (2p/3w) for Power Inlet 16A is the mating connector for the Victron 16 A power inlet, used for the shore power connection. It has a two-pole plus earth configuration, rated 16 A at 250 Vac.

Power Inlet Polyamide with Cover 16A/250Vac (2p/3w) is a shore power inlet for connecting boats and vehicles to the grid via the shore power cord. It has an IEC 60309 connector, a reinforced polyamide cover and IP56 protection.

Power Inlet Stainless Steel with Cover 16A/250Vac (2p/3w) is a shore power inlet for connecting boats and vehicles to the grid via the shore power cord. It has an IEC 60309 connector, a 316 stainless steel cover and IP56 protection.

Skylla-TG 48/50(1) 230V is a 48 V battery charger with a nominal charge current of 50 A, a single charge output and a 230 V supply. It uses a three-stage IUoU algorithm with an included temperature sensor, and the charge voltage is set via DIP switches and potentiometers. It can also be used as a power supply and is sized for battery banks of 250-500 Ah.

Skylla-TG 24/100(1+1) GL 120-240V is the Germanischer Lloyd certified version of the Skylla-TG charger for 24 V batteries, with a nominal charge current of 100 A and a 120-240 V AC input. It has a main output and a 4 A output for a starter battery, a three-stage IUoU algorithm and an included temperature sensor. It is sized for battery banks of 500-1000 Ah.

Skylla-TG 48/25(1) 230V is a 48 V battery charger with a nominal charge current of 25 A, a single charge output and a 230 V supply. It uses a three-stage IUoU algorithm with an included temperature sensor, and the charge voltage is set via DIP switches and potentiometers. It can also be used as a power supply and is sized for battery banks of 125-250 Ah.

Skylla-TG 24/80(1+1) 230V is a 24 V battery charger with a nominal charge current of 80 A and a 230 V AC input. It has one full-rated main output and a second 4 A output for a starter battery. Charge voltage is adjustable and temperature-compensated via the included sensor. It is sized for battery banks of 400-800 Ah.

Skylla-TG 24/100(1+1) 230V is a 24 V battery charger with a nominal charge current of 100 A and a 230 V AC input. It has one full-rated main output and a second 4 A output for a starter battery. Charge voltage is adjustable and temperature-compensated via the included sensor. It is sized for battery banks of 500-1000 Ah.

Skylla-TG 24/50 GMDSS 120-240V is a 24 V battery charger with a nominal charge current of 50 A, designed for maritime GMDSS systems. Both the battery and the GMDSS system connect directly to the charger, while data and alarms are shown on the VE.Net GMDSS panel, ordered separately and linked by a standard eight-wire UTP cable.

Skylla-TG 24/50(1+1) 230V is a 24 V battery charger with a nominal charge current of 50 A and a 230 V AC input. It has one full-rated main output and a second 4 A output for a starter battery. Charge voltage is adjustable and temperature-compensated via the included sensor. It is sized for battery banks of 150-500 Ah.

Skylla-TG 24/50(1+1) GL 120-240V is the Germanischer Lloyd certified version of the Skylla-TG charger for 24 V batteries, with a nominal charge current of 50 A and a 120-240 V AC input. It has a main output and a 4 A output for a starter battery, a three-stage IUoU algorithm and an included temperature sensor. It is sized for battery banks of 250-500 Ah.

Skylla-TG 24/30(1+1) 120-240V is a 24 V battery charger with a nominal charge current of 30 A and a 120-240 V AC input. It has one full-rated main output and a second 4 A output for a starter battery. Charge voltage is adjustable and temperature-compensated via the included sensor. It is sized for battery banks of 150-500 Ah.

Skylla-TG 24/30(1+1) GL 120-240V is the Germanischer Lloyd certified version of the Skylla-TG charger for 24 V batteries, with a nominal charge current of 30 A and a 120-240 V AC input. It has a main output and a 4 A output for a starter battery, a three-stage IUoU algorithm and an included temperature sensor. It is sized for battery banks of 150-300 Ah.

Skylla-TG 24/30 GMDSS 120-240V is a 24 V battery charger with a nominal charge current of 30 A, designed for maritime GMDSS systems. Both the battery and the GMDSS system connect directly to the charger, while data and alarms are shown on the VE.Net GMDSS panel, ordered separately and linked by a standard eight-wire UTP cable.

Skylla Control CE is a remote control panel for Skylla battery chargers. It allows the charge current to be changed and shows the system status.

Filax 2 Transfer Switch CE 230V/50Hz-240V/60Hz switches sensitive loads, such as computers or modern electronic equipment, between two AC sources. The priority source is typically the mains, a generator or shore power, and the alternate source an inverter. With a 16 ms transfer time, loads keep running without disruption. It is not intended for high-power appliances such as washing machines.

MPPT WireBox-XL Tr 150-85/100 & 250-85/100 VE.Can is a protective cover for MPPT 150/85, 150/100, 250/85 and 250/100 Tr VE.Can solar chargers. It covers all DC terminals and prevents accidental contact with the screws in general access areas.

Filax 2 Transfer Switch CE 110V/50Hz-120V/60Hz switches sensitive loads, such as computers or modern electronic equipment, between two AC sources. The priority source is typically the mains, a generator or shore power, and the alternate source an inverter. With a 16 ms transfer time, loads keep running without disruption. It is not intended for high-power appliances such as washing machines.