New products

MPPT WireBox-XL MC4 150-85/100 & 250-85/100 VE.Can is a protective cover for MPPT 150/85, 150/100, 250/85 and 250/100 MC4 VE.Can solar chargers. It covers all DC terminals and prevents accidental contact with the screws in general access areas.

MPPT WireBox-S 100-20 is a protective cover for the DC terminals of MPPT 100/20 solar chargers. It prevents accidental contact with the screws and is useful in general access areas.

MPPT WireBox-M 100-30/50 & 150-35/45 is a protective cover for the DC terminals of MPPT 100/30, 100/50, 150/35 and 150/45 solar chargers. It prevents accidental contact with the screws and is useful in general access areas.

MPPT WireBox-L MC4 150-70 & 250/70 VE.Can is a protective cover for MPPT 150/70 and 250/70 MC4 VE.Can solar chargers. It covers all DC terminals and prevents accidental contact with the screws in general access areas.

MPPT WireBox-L Tr 150-60/70 & 250-60/70 is a protective cover for MPPT 150/60, 150/70, 250/60 and 250/70 Tr solar chargers. It covers all DC terminals and prevents accidental contact with the screws in general access areas.

MPPT WireBox-S 100-15 is a protective cover for the DC terminals of MPPT 100/15 solar chargers. It prevents accidental contact with the screws and is useful in general access areas.

MPPT WireBox-S 75-10/15 is a protective cover for the DC terminals of MPPT 75/10 and 75/15 solar chargers. It prevents accidental contact with the screws and is useful in general access areas.

Temperature Sensor for BlueSolar PWM-Pro Charge Controller is an accessory dedicated to BlueSolar PWM-Pro solar charge controllers. It connects to the controller and allows temperature to be measured in the solar system.

BlueSolar PWM-Pro to USB Interface Cable connects the BlueSolar PWM-Pro solar charge controller to a computer via a USB port. Details on its use are given in the controller manual.

MPPT Control is a display and setup panel for all BlueSolar MPPT charge controllers with a VE.Direct port. It shows live solar power, battery voltage, charge and load current, as well as historical values.

Remote Panel BlueSolar PWM-Pro is a remote control panel designed for BlueSolar PWM-Pro solar charge controllers, giving access to the controller without needing to reach the location where it is installed.

BlueSolar MPPT 150/60-Tr is an MPPT solar charge controller for 12, 24 or 48V batteries with automatic selection that maximises solar energy harvest and extends battery life. It accepts up to 150 V open-circuit voltage, charges at 60 A and has 35 mm² screw terminals and a VE.Direct port. Advanced maximum power point detection also works under partial shading.

SmartSolar MPPT 150/60-MC4 is an MPPT solar charge controller with built-in Bluetooth for 12, 24 or 48V batteries that maximises solar energy harvest. It can even recharge a battery depleted down to 0 V, provided the cells are not damaged, and the panels connect via two pairs of MC4 connectors. Maximum efficiency exceeds 98%, with no cooling fan.

BlueSolar MPPT 75/15 is an MPPT solar charge controller for 12V or 24V batteries that maximises the energy harvested from solar panels and reaches full charge in the shortest possible time while maintaining battery health. It accepts up to 75 V open-circuit PV voltage and has a load output and a VE.Direct port. It harvests up to 30% more energy than a PWM controller.

Solar Adapter Cable MC4/F to MC3/M 15cm is a short adapter cable linking an MC4 female connector to an MC3 male connector, used to connect solar panels or equipment that use different connector systems.

Solar Splitter Pair MC4-Y, 1x M-2F / 1x F-2M is a set of two MC4 Y-splitters, one male to 2x female and one female to 2x male, used to connect two solar panels in parallel on a single cable run.

Solar Connector Pair MC4, 1x Male/1x Female is a set of one MC4 male and one MC4 female connector, used to assemble or repair PV cables and connect them to solar panels or charge controllers.

Solar Adapter Cable MC4/M to MC3/F 15cm is a short adapter cable linking an MC4 male connector to an MC3 female connector, used to connect solar panels or equipment that use different connector systems.

Solar Cable 20m/6mm² MC4-M/F (PV-ST01) is a pre-assembled 20 m PV cable with MC4 male and female connectors, intended for longer runs between the PV array and the charge controller.

Solar Cable 10m/6mm² MC4-M/F (PV-ST01) is a pre-assembled 10 m PV cable with MC4 male and female connectors, intended for longer runs between the PV array and the charge controller.