New products

Cyrix-Li-load 12/24V-230A is a microprocessor-controlled intelligent load relay for 12 V or 24 V lithium battery systems. Installed in the load circuit, it stays engaged while the control input is high and cuts power to the loads as soon as the input is left floating or pulled low.

Cyrix-ct 12/24V-230A is a microprocessor-controlled battery combiner that automatically connects batteries in parallel when one of them is being charged and disconnects them when the voltage drops below float level. Rated at 230 A continuous, it replaces diode isolators with virtually no voltage loss, so the alternator voltage does not need to be raised.

Cyrix-ct 12/24V-230A is a microprocessor-controlled battery combiner that automatically connects batteries in parallel when one of them is being charged and disconnects them when the voltage drops below float level. Rated at 230 A continuous, it replaces diode isolators with virtually no voltage loss, so the alternator voltage does not need to be raised.

Cyrix-Li-ct 12/24V-120A is a microprocessor-controlled battery combiner for 12 V or 24 V lithium-ion systems. It automatically connects batteries in parallel during charging and separates them when the voltage falls below float level, while a control input allows the relay to be engaged or disengaged by an external signal.

Cyrix-Li-load 12/24V-120A is a microprocessor-controlled intelligent load relay for 12 V or 24 V lithium battery systems. Installed in the load circuit, it stays engaged while the control input is high and cuts power to the loads as soon as the input is left floating or pulled low.

Cyrix-Li-charge 12/24V-120A is a microprocessor-controlled intelligent charge relay for 12 V or 24 V lithium battery systems. It engages when its control input is pulled high, to approximately battery voltage, and disengages when the input is left floating or pulled low, so the charging source can be disconnected from the battery by an external signal.

The Cyrix-ct 12/24V-120A Battery Combiner Kit is designed for adding a second or third battery to a car, boat, RV or other vehicle. All batteries are charged from the engine electrical system, while the starter battery is isolated when charging stops, so the engine can still be started.

The 100A:50mA current transformer with 5 m cable and wire ends is an accessory for the MultiPlus-II and MultiGrid-II. Through external current sensing it enables PowerControl and PowerAssist and optimised self-consumption.

The 100A:50mA current transformer with 20 m cable and wire ends is an accessory for the MultiPlus-II and MultiGrid-II. Through external current sensing it enables PowerControl and PowerAssist and optimised self-consumption.

The 400A:50mA current transformer with 10 m cable and wire ends is an accessory for the MultiPlus-II and MultiGrid-II. Through external current sensing it enables PowerControl and PowerAssist and optimised self-consumption.

The 100A:50mA current transformer with 1 m cable and wire ends is an accessory for the MultiPlus-II and MultiGrid-II. Through external current sensing it enables PowerControl and PowerAssist and optimised self-consumption.

The single-phase AC Current Sensor, max. 40 A, is an external sensor that measures current, power (VA) and energy of a PV inverter connected to the AC input or output of a Multi or Quattro, displayed via the Color Control and on VRM.

Inverter Compact 24/1600 230V VE.Bus is a high-efficiency pure sine wave inverter developed for professional duty and suitable for a wide range of applications. It converts 24 V battery power into 230 V AC with a rated power of 1600 VA, and the VE.Bus port allows integration into Victron systems.

VE Transfer Switch 5KVA is a single-phase automatic transfer switch for 200-250 V AC that switches between two power sources: generator and shore power, inverter and generator, or inverter and shore power. It has two inputs and one output rated 20 A and automatically transfers the available AC power to the output.

VE Transfer Switch 10KVA is a single-phase automatic transfer switch for 200-250 V AC that switches between two power sources: generator and shore power, inverter and generator, or inverter and shore power. It has two inputs and one output rated 40 A and automatically transfers the available AC power to the output.

MultiPlus Compact 12/800/35-16 230V VE.Bus is an inverter/charger that combines a 800 VA true sine wave inverter and a 35 A adaptive charger for 12 V batteries in one compact enclosure. PowerAssist technology supplements mains or generator power when demand exceeds the source limit, and the VE.Bus port allows parallel, three-phase and system integration.

Centaur 24/60(3) 120-240V is a 24 V, 60 A battery charger with an auto-ranging 90-265 V AC, 50/60 Hz input that maintains full output across the whole range, so it can be used anywhere in the world. Automatic three-stage (IUoU) charging and three isolated outputs suit multi-battery installations, including large banks of 240-600 Ah.

Inverter Compact 24/2000 230V VE.Bus is a high-efficiency pure sine wave inverter developed for professional duty, converting 24 V battery power into 230 V AC with 2000 VA continuous and 4000 W peak. Output frequency is selectable at 50 or 60 Hz, and the VE.Bus port allows parallel or three-phase operation.

EasyPlus Compact 12/1600/70-16 230V VE.Bus is a multifunctional energy system that combines a 1600 VA sine wave inverter, a 70 A battery charger, a high-speed AC transfer switch and AC distribution in a single compact enclosure. It is designed for users who want a complete system without the complexity of installing separate components.

Centaur 24/40(3) 120-240V is a 24 V, 40 A battery charger with an auto-ranging 90-265 V AC, 50/60 Hz input that maintains full output across the whole range, so it can be used anywhere in the world. Automatic three-stage (IUoU) charging and three isolated outputs suit multi-battery installations, with a recommended capacity of 160-400 Ah.