540 € Ohne Steuern
Deye AE-F2.56 is a 51.2 V, 2.56 kWh LiFePO4 expansion battery module for the Deye SUN-BK micro hybrid energy storage system. It has IP65 ingress protection, a maximum current of 50 A, 6000 cycles and is stacked: up to 5 modules per stack (12.8 kWh) and up to 40 modules in total (102.4 kWh).
Deye AE-F2.56 is a 51.2 V, 2.56 kWh LiFePO4 battery module designed specifically as an expansion for the Deye SUN-BK micro hybrid energy storage system. It cannot operate independently and is used together with the micro hybrid system to increase its total capacity.
The module is intended exclusively for expanding the Deye SUN-BK micro hybrid system and cannot operate independently; if used on its own, an inverter and an adapter supplied separately are required. It must not be connected with batteries of other models. Modules are stacked without wiring between them, up to 5 per stack (12.8 kWh), and a special base allows up to 8 stacks, so up to 40 modules (102.4 kWh).
State of charge and alarms are shown by LED. The operating temperature is -10 ... 55 °C, or -20 ... 55 °C with optional heating. The box contains the battery module, 2 fixing brackets, M4 screws and 2 expansion bolts, and the quick installation guide.
| Product type | Battery |
|---|---|
| Battery chemistry | LiFePO4 (lithium iron phosphate) |
| Battery voltage class | 48 V |
| Nominal voltage | 51.2 V |
| Operating voltage range | 44.8-57.6 V |
| Nominal energy | 2560 Wh |
| Capacity class | 2.5-6 kWh |
| Max. charge / discharge current | 50 A |
| Cycle life | 6000 cycles (25 ± 2 °C, down to 70 % of capacity) |
| Parallel connection | up to 5 modules per stack (12.8 kWh); up to 40 modules in total (102.4 kWh) |
| Communication interfaces | LoRa |
| Display / indicator | LED (SOC, alarm) |
| Ingress protection (IP) | IP65 |
| Operating temperature | -10 ... 55 °C (-20 ... 55 °C with optional heating) |
| Max. relative humidity | 95 % |
| Installation | floor or stacked |
| Standards and compliance | UN38.3, IEC 62619, CE |
| Dimensions (height x width x depth) | 244 x 450 x 210 mm (without terminals) |
| Weight | 24 kg |
Diese technischen Daten wurden von uns aus dem Datenblatt des Herstellers übernommen und können Übertragungsfehler enthalten. Für 100 % Genauigkeit sehen Sie bitte im beigefügten Datenblatt nach.
Die Kompatibilität wird automatisch aus den technischen Daten der Hersteller berechnet und dient nur zur Information. Bei komplexen Anlagen empfehlen wir, die Konfiguration vor der Bestellung von einem Berater prüfen zu lassen. Details in den AGB
