SOLAR CHARGE CONTROLLERS

SHS 200 MPPT v3.0 MC4 is the MPPT unit of the SHS 200, part of the Victron Solar Home System range, in the 12 V version (v3.0) with MC4 connectors. It is combined with the other SHS 200 components, such as the battery box and the solar cable, which are ordered separately, to build a solar home system.

MPPT WireBox-XL Tr 150-85/100 & 250-85/100 VE.Can is a protective cover for MPPT 150/85, 150/100, 250/85 and 250/100 Tr VE.Can solar chargers. It covers all DC terminals and prevents accidental contact with the screws in general access areas.

MPPT WireBox-XL MC4 150-85/100 & 250-85/100 VE.Can is a protective cover for MPPT 150/85, 150/100, 250/85 and 250/100 MC4 VE.Can solar chargers. It covers all DC terminals and prevents accidental contact with the screws in general access areas.

MPPT WireBox-S 100-20 is a protective cover for the DC terminals of MPPT 100/20 solar chargers. It prevents accidental contact with the screws and is useful in general access areas.

MPPT WireBox-M 100-30/50 & 150-35/45 is a protective cover for the DC terminals of MPPT 100/30, 100/50, 150/35 and 150/45 solar chargers. It prevents accidental contact with the screws and is useful in general access areas.

MPPT WireBox-L MC4 150-70 & 250/70 VE.Can is a protective cover for MPPT 150/70 and 250/70 MC4 VE.Can solar chargers. It covers all DC terminals and prevents accidental contact with the screws in general access areas.

MPPT WireBox-L Tr 150-60/70 & 250-60/70 is a protective cover for MPPT 150/60, 150/70, 250/60 and 250/70 Tr solar chargers. It covers all DC terminals and prevents accidental contact with the screws in general access areas.

MPPT WireBox-S 100-15 is a protective cover for the DC terminals of MPPT 100/15 solar chargers. It prevents accidental contact with the screws and is useful in general access areas.

MPPT WireBox-S 75-10/15 is a protective cover for the DC terminals of MPPT 75/10 and 75/15 solar chargers. It prevents accidental contact with the screws and is useful in general access areas.

Temperature Sensor for BlueSolar PWM-Pro Charge Controller is an accessory dedicated to BlueSolar PWM-Pro solar charge controllers. It connects to the controller and allows temperature to be measured in the solar system.

BlueSolar PWM-Pro to USB Interface Cable connects the BlueSolar PWM-Pro solar charge controller to a computer via a USB port. Details on its use are given in the controller manual.

MPPT Control is a display and setup panel for all BlueSolar MPPT charge controllers with a VE.Direct port. It shows live solar power, battery voltage, charge and load current, as well as historical values.

Remote Panel BlueSolar PWM-Pro is a remote control panel designed for BlueSolar PWM-Pro solar charge controllers, giving access to the controller without needing to reach the location where it is installed.

BlueSolar MPPT 150/60-Tr is an MPPT solar charge controller for 12, 24 or 48V batteries with automatic selection that maximises solar energy harvest and extends battery life. It accepts up to 150 V open-circuit voltage, charges at 60 A and has 35 mm² screw terminals and a VE.Direct port. Advanced maximum power point detection also works under partial shading.

SmartSolar MPPT 150/60-MC4 is an MPPT solar charge controller with built-in Bluetooth for 12, 24 or 48V batteries that maximises solar energy harvest. It can even recharge a battery depleted down to 0 V, provided the cells are not damaged, and the panels connect via two pairs of MC4 connectors. Maximum efficiency exceeds 98%, with no cooling fan.

BlueSolar MPPT 75/15 is an MPPT solar charge controller for 12V or 24V batteries that maximises the energy harvested from solar panels and reaches full charge in the shortest possible time while maintaining battery health. It accepts up to 75 V open-circuit PV voltage and has a load output and a VE.Direct port. It harvests up to 30% more energy than a PWM controller.

The Victron SmartSolar MPPT RS 450/100 is a high-performance solar charger designed for photovoltaic systems with extended strings of panels and batteries at 48V. It is ideal for off-grid applications, as well as for grid-connected installations. Available in 5.76 kW and 11.52 kW versions, it offers high efficiency, advanced connectivity and reliable operation in a modern and robust design.

A solar charger gathers energy from your solar panels, and stores it in your batteries.

A solar charger gathers energy from your solar panels, and stores it in your batteries. Using the latest, fastest technology, SmartSolar maximises this energy-harvest, driving it intelligently to achieve full charge in the shortest possible time. The SmartSolar maintains battery health, extending its life.

A solar charger gathers energy from your solar panels, and stores it in your batteries. Using the latest, fastest technology, SmartSolar maximises this energy-harvest, driving it intelligently to achieve full charge in the shortest possible time. The SmartSolar maintains battery health, extending its life.